 | IMPERIAL 90767 FLARE ANGLE NEEDLE VALVE 1/4" (PACK OF 5)
Brand: Imperial Model: 90767 Part Number: 90767
"IMPERIAL" NEEDLE VALVE
SAE 45° Flare Angle Needle Valve.
Brass body and steel handle.
Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear, or aircraft applications.
Temperature Range: -65° F. to 250° F. however, system temperature and type of tubing should be considered.
Pressure Range: 150 psi maximum
Tube Outside Diameter: 3/8"
Pipe Thread: 1/4"
Cross Reference: 330 | *$89.56 |
 | IMPERIAL 90768 COMPRESSION ANGLE NEEDLE VALVE 1/8" (PACK OF 5)
Brand: Imperial Model: 90768 Part Number: 90768
"IMPERIAL" ANGLE NEEDLE VALVE
Compression Angle Needle Valve.
Brass body and steel handle.
Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear, or aircraft applications.
Temperature Range: -65° F. to 250° F. however, system temperature and type of tubing should be considered.
Pressure Range: 150 psi maximum
Tube Outside Diameter: 1/4"
Pipe Thread: 1/8"
Cross Reference: A555 | *$59.74 |
 | IMPERIAL 90861-4 TENDER SPRING W/COVER(PACK OF 5)
Brand: Imperial Model: 90861-4 Part Number: 90861-4
"IMPERIAL" TENDER SPRING
Spring Size: 1" x 20"
Includes a carabiner.
Tender spring with cover hardware
For use with two 3/8" air brake hoses and one 7-way ABS cord. | *$133.49 |
 | IMPERIAL 90891 REPLACEMENT FITTING UNION 1/8" (PACK OF 5)
Brand: Imperial Model: 90891 Part Number: 90891
"IMPERIAL" FITTING UNION
Replacement Union Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Outside Diameter: 1/8"
Thread Size: 5/1624"
Cross Reference: 283 x 2 | *$31.57 |
 | IMPERIAL 90895 BULKHEAD COUPLING 13/16" (PACK OF 5)
Brand: Imperial Model: 90895 Part Number: 90895
"IMPERIAL" BULKHEAD COUPLING
Primary applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F to 400° F.
Material: carbon steel - AISI/SAE 12L14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 3/8"
Fixed Hex: 13/16"
Inside Diameter: 0.297"
Panel Face To End Length: 1.31"
Overall Length: 2.18"
Cross Reference: C5325x6 | *$49.86 |
| IMPERIAL 90896 BULKHEAD COUPLING 2.44"LONG (PACK OF 5)
Brand: Imperial Model: 90896 Part Number: 90896
"IMPERIAL" BULKHEAD COUPLING
Primary applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F to 400° F.
Material: carbon steel - AISI/SAE 12L14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 1/2"
Fixed Hex: 1"
Inside Diameter: 0.391"
Panel Face To End Length: 1.47"
Overall Length: 2.44"
Cross Reference: C5325x8 | *$66.42 |
| | IMPERIAL 90921 REPLACEMENT MALE ELBOW FITTING 5/1624" (PACK OF 5)
Brand: Imperial Model: 90921 Part Number: 90921
"IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/8"
Cross Reference: 284 x 2 | *$41.35 |
| | IMPERIAL 90922 REPLACEMENT MALE ELBOW FITTING 5/1624"x1/8" (PACK OF 5)
Brand: Imperial Model: 90922 Part Number: 90922
"IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/16"
Cross Reference: 284 x 2 x 1 | *$44.26 |
| | IMPERIAL 90940 REPLACEMENT SLEEVE FITTING 1/8" (PACK OF 50)
Brand: Imperial Model: 90940 Part Number: 90940
"IMPERIAL" SLEEVE FITTING
Replacement Sleeve Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Outside Diameter: 1/8"
Thread Size: 5/1624"
Cross Reference: 280 x 2 | *$62.34 |
 | IMPERIAL 90950 FLARE TUBE PLUG 3/8-24" (PACK OF 5)
Brand: Imperial Model: 90950 Part Number: 90950
"IMPERIAL" FLARE TUBE PLUG
45° Flare Tube Plug Fitting.
45° Flare Tube Fittings conform to ASA, ASME, SAE, and Mil. specifications
Good resistance to vibration. Use Long Nut in applications with severe vibration.
45° Flare Tube Fittings flare fittings are reusable.
Used with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
Working pressure up to 2,000 psi, depending upon tubing being used. (Will withstand burst pressure up to 5,000 psi).
Temperature Range: -65° F. to 250° F. at maximum operating pressures.
Tube Outside Diameter: 3/16"
Thread Size: 3/8-24" | *$45.78 |
| | IMPERIAL 91103 PERMALIGN NUT FITTING 5/16(PACK OF 10)
Brand: Imperial Model: 91103 Part Number: 91103
"IMPERIAL" PERMALIGN NUT FITTING
Tube Outside Diameter: 5/16
Cross Reference: 961A-5
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$21.69 |
 | IMPERIAL 91108 PERMALIGN UNION FITTING 1/8(PACK OF 10)
Brand: Imperial Model: 91108 Part Number: 91108
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 1/8
Cross Reference: 962A-2
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$55.69 |
| IMPERIAL 91109 PERMALIGN UNION FITTING 3/16(PACK OF 10)
Brand: Imperial Model: 91109 Part Number: 91109
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 3/16
Cross Reference: 962A-3
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi | *$49.79 |
| IMPERIAL 91110 PERMALIGN UNION FITTING 1/4(PACK OF 10)
Brand: Imperial Model: 91110 Part Number: 91110
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 1/4
Cross Reference: 962A-4
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$52.89 |
| IMPERIAL 91111 PERMALIGN UNION FITTING 5/16(PACK OF 10)
Brand: Imperial Model: 91111 Part Number: 91111
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 5/16
Cross Reference: 962A-5
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$65.99 |
| IMPERIAL 91112 PERMALIGN UNION FITTING 3/8(PACK OF 10)
Brand: Imperial Model: 91112 Part Number: 91112
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 3/8
Cross Reference: 962A-6
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$71.69 |
| IMPERIAL 91113 PERMALIGN UNION FITTING 1/2(PACK OF 10)
Brand: Imperial Model: 91113 Part Number: 91113
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 1/2
Cross Reference: 962A-8
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$130.49 |
 | IMPERIAL 91950 #H03912 SUCTION HOSE 3/4x1-3/8" ID
Brand: Imperial Model: 91950 Part Number: 91950
"IMPERIAL" SUCTION HOSE
Hose ID: 3/4"
Hose OD: 1-3/8
Working pressure: 300 psi
Minimum burst pressure: 1200 psi
Minimum bend radius: 5"
Temperature range: -40° F to 212° F
Weatherhead cross reference: H03912
Use with U-Series or 430 U-Series.
Typical application: hydraulic suction hose.
Marine application J1942/1 hydraulic only, ABS and MSHA accepted.
Hose Construction: Inner Tube: nitrile blend,Cover: neoprene,Reinforcement:
3/4" to 1-1/2" - one helical cable wire and one fiber braid.
2" - one helical, straight-stranded wire and one fiber braid. | *$469.99 |
 | IMPERIAL 92357 "90-SERIES" MALE PIPE FITTING 1/2"(PACK OF 5)
Brand: Imperial Model: 92357 Part Number: 92357
"IMPERIAL" MALE PIPE FITTING
Hose Inside Diameter: 1/2
Pipe Size: 1/2
Thread Size: 1/2 14
Cut-Off Factor: 1-7/16
Cross Reference: 20190-8-10
Reusable 90-Series Male Pipe Fitting for Teflon® Hose. | *$112.29 |
| IMPERIAL 92358 "90-SERIES" MALE PIPE FITTING 5/8x3/4 (PACK OF 5)
Brand: Imperial Model: 92358 Part Number: 92358
"IMPERIAL" MALE PIPE FITTING
Hose Inside Diameter: 5/8
Pipe Size: 3/4
Thread Size: 3/4 14
Cut-Off Factor: 1-19/32
Cross Reference: 20190-12-12
Reusable 90-Series Male Pipe Fitting for Teflon® Hose. | *$125.39 |
 | IMPERIAL 92362 "90-SERIES" FEMALE JIC SWIVEL FITTING 3/16x1/4 (PACK OF 5)
Brand: Imperial Model: 92362 Part Number: 92362
"IMPERIAL" FEMALE JIC SWIVEL FITTING
Tube Size: 1/4
Universal fit - 37° and 45°.
Hose Inside Diameter: 3/16
Thread Size: 7/16 20
Cut-Off Factor: 1-1/8
Cross Reference: 20690-4-4
Reusable 90-Series Female JIC Swivel Fitting for Teflon® Hose. | *$72.49 |
| IMPERIAL 92363 "90-SERIES" FEMALE JIC SWIVEL FITTING 1/4x5/16 (PACK OF 5)
Brand: Imperial Model: 92363 Part Number: 92363
"IMPERIAL" FEMALE JIC SWIVEL FITTING
Tube Size: 5/16
Universal fit - 37° and 45°.
Hose Inside Diameter: 1/4
Thread Size: 1/2 20
Cut-Off Factor: 1-3/32
Cross Reference: 20690-5-5
Reusable 90-Series Female JIC Swivel Fitting for Teflon® Hose. | *$82.59 |
| IMPERIAL 92367 "90-SERIES" FEMALE JIC SWIVEL FITTING 1/2x5/8(PACK OF 5)
Brand: Imperial Model: 92367 Part Number: 92367
"IMPERIAL" FEMALE JIC SWIVEL FITTING
Universal fit - 37° and 45°.
Hose Inside Diameter: 1/2
Tube Size: 5/8
Thread Size: 7/8 14
Cut-Off Factor: 1-9/16
Cross Reference: 20690-10-10
Reusable 90-Series Female JIC Swivel Fitting for Teflon® Hose. | *$115.89 |
 | IMPERIAL 92371 "90-SERIES" STRAIGHT TUBE FITTING 1/2x1/2 (PACK OF 2)
Brand: Imperial Model: 92371 Part Number: 92371
"IMPERIAL" STRAIGHT TUBE FITTING
Hose Inside Diameter: 1/2
Tube Size: 1/2
Cut-Off Factor: 2-1/2
Cross Reference: 23490-8-10
Reusable 90-Series Straight Tube Fitting for Teflon® Hose. | *$115.09 |
 | Imperial 93203 Coll-o-crimp 430 U Series Hose End
Brand: Imperial Model: 93203 Part Number: 93203
Plating: Zinc; yellow dichromate finish
Hose Inside Diameter: 1/2
Tube Size: 5/8
Thread Size: 7/8-14
Cut-Off Factor: 1.38
Cross Reference: 43008U-510
Must use special T-420 collets on the T-420 Coll-O-Crimp machine, no spacer ring required.
CAUTION: H430 U Series No-skive Hose Ends are designed for use with specific sizes and types of hose. | *$52.29 |
 | IMPERIAL 93410 #H56904 HYDRAULIC HOSE - 3/16"
Brand: Imperial Model: 93410 Part Number: 93410
"IMPERIAL" HYDRAULIC HOSE
Hose ID: 3/16"
Hose OD: 33/64"
Hose Lengh: 50 feet.
Minimum Bend Radius: 3"
Cross Reference: H56904
ABS approved sizes for 5/16" to 1-1/8".
Maximum Working Pressure: 3000 psi
Minimum Burst Pressure: 12000 psi
SAE 100R5, SAE J1402 Type All, DOT A11*, ABS (*Air brake applications limited to sizes -04 through -12)
Temperature range:(hydraulic fluid: -55° F to 302° F,Air brake: -40° F to 200° F,Air: -40° F to 212° F
Hose Construction:(Inner tube: CPE,Cover: fiber braid,Reinforcement: two fiber braids and one steel braid).
Applications: general purpose truck, marine, and hydraulic hose. For air brake (4-12), diesel fuel, grease lines, high temp. petroleum oils and medium pressure hydraulic applications. | *$355.89 |
| IMPERIAL 93413 #H56908 HYDRAULIC HOSE 13/32" - 50' LENGTH
Brand: Imperial Model: 93413 Part Number: 93413
"IMPERIAL" HYDRAULIC HOSE
Hose ID: 13/32"
Hose OD: 49/64"
Hose Lengh: 50 feet.
Minimum Bend Radius: 4-5/8"
Cross Reference: H56908
ABS approved sizes for 5/16" to 1-1/8".
Maximum Working Pressure: 2000 psi
Minimum Burst Pressure: 8000 psi
SAE 100R5, SAE J1402 Type All, DOT A11*, ABS (*Air brake applications limited to sizes -04 through -12)
Temperature range:(hydraulic fluid: -55° F to 302° F,Air brake: -40° F to 200° F,Air: -40° F to 212° F
Hose Construction:(Inner tube: CPE,Cover: fiber braid,Reinforcement: two fiber braids and one steel braid).
Applications: general purpose truck, marine, and hydraulic hose. For air brake (4-12), diesel fuel, grease lines, high temp. petroleum oils and medium pressure hydraulic applications. | *$392.19 |
 | IMPERIAL 93420 #H10404 HYDRAULIC MEDIUM PRESSURE HOSE 1/4" - 50' LENGTH
Brand: Imperial Model: 93420 Part Number: 93420
"IMPERIAL" HYDRAULIC MEDIUM PRESSURE HOSE
Hose Inside Diameter: 1/4"
Hose Outside Diameter: 17/32"
Maximum Working Pressure: 2,750 psi
Minimum Burst Pressure: 11,000 psi
Cross Reference: H10404
MSHA accepted.
Length: 50 ft.
Use with U-Series Hose Ends.
USCG fuel/lube systems accepted.
Meets or exceeds SAE 100R1 Type AT.
Temperature Range: -40° F. to 212° F. (-40° C. to 100° C.)
Most commonly used for medium pressure hydraulic lines for farm equipment.
Hose Construction:(Inner Tube: Neoprene,Reinforcement: 1 steel braid,Cover: Neoprene). | *$145.95 |
| | IMPERIAL 96032 90° ELBOW SWIVEL ADAPTER - 3/8X1/2(PACK OF 5)
Brand: Imperial Model: 96032 Part Number: 96032
"IMPERIAL" SWIVEL ADAPTER
Female Pipe Swivel to Male Pipe 90° Elbow Swivel Adapter Fitting.
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 3/818
Male Pipe Thread Size: 1/214
Cross Reference: 9405 x 6 x 8 | *$68.49 |
| | IMPERIAL 96034 90° ELBOW SWIVEL ADAPTER - 1/2X3/4 (PACK OF 2)
Brand: Imperial Model: 96034 Part Number: 96034
"IMPERIAL" SWIVEL ADAPTER
Female Pipe Swivel to Male Pipe 90° Elbow Swivel Adapter Fitting.
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/214
Male Pipe Thread Size: 3/414
Cross Reference: 9405 x 8 x 12 | *$46.69 |
 | IMPERIAL 96088 FEMALE PIPE SWIVEL TO FEMALE PIPE SWIVEL ADAPTER - 1/4X1/4(PACK OF 5)
Brand: Imperial Model: 96088 Part Number: 96088
"IMPERIAL" SWIVEL ADAPTER
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/418
Female Pipe Thread Size: 1/418
Cross Reference: 9255 x 4 x 4 | *$30.89 |
| | Imperial 97017 High Pressure Steel Adaptor Bushing
Brand: Imperial Model: 97017 Part Number: 97017
Precision machined from AISI 12L14 carbon steel.
Compact size; excellent wrench pads.
Dryseal pipe threads.
Meets or exceeds all SAE standards.
Temperature Range: -65 F. to 400 F.
Pipe Thread: 2" - 11-1/2 thread x 1-1/4 - 11-1/2 thread | *$52.59 |
| | IMPERIAL 97311 SWING COUPLER 3/8NPT - FEMALE (PACK OF 2)
Brand: Imperial Model: 97311 Part Number: 97311
"IMPERIAL" SWING COUPLER
Series E:
Body style: 3/8"
Female NPT: 3/8"
To be used on supply lines up to 360 psi.
Connect and disconnect safely - under pressure (no "pop").
The unique design provides superior sealing, ease of operation, and long service life.
Swing couplings interchange with most common plug systems.
Series A1 - interchange with Aro 210, Parker 50
Series B1 - interchange with Aro 23000, Hansen 3000, Parker 20, 30 HF, EZ, 1/4
Series E - interchange with Aro 23203, Hansen 4000, Parker 20, 30 HF, EZ, 3/8
Series H - interchange with Aro, 23104, 23204, Hansen 5000, Parker 20, 30, HF, EZ, 1/2 | *$109.49 |
 | IMPERIAL 97342 QUICK DISCONNECT COUPLER PLUG 3/8"x1/4"MNPT (PACK OF 2)
Brand: Imperial Model: 97342 Part Number: 97342
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Male NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.79 |
 | IMPERIAL 97350 QUICK DISCONNECT COUPLER BODY 1/4"x1/4"FNPT(PACK OF 2)
Brand: Imperial Model: 97350 Part Number: 97350
"IMPERIAL" QUICK DISCONNECT COUPLER BODY
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler body.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$16.99 |
 | IMPERIAL 97351 QUICK DISCONNECT COUPLER BODY 1/4"x1/4"MNPT(PACK OF 2)
Brand: Imperial Model: 97351 Part Number: 97351
"IMPERIAL" QUICK DISCONNECT COUPLER BODY
Body Style: 1/4"
Male NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler body.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$15.69 |
| IMPERIAL 97352 QUICK DISCONNECT COUPLER BODY 3/8"x3/8"MNPT
Brand: Imperial Model: 97352 Part Number: 97352
"IMPERIAL" QUICK DISCONNECT COUPLER BODY
Body Style: 3/8"
Male NPT: 3/8"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler body.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$18.99 |
| IMPERIAL 97353 QUICK DISCONNECT COUPLER BODY 3/8"x3/8"FNPT
Brand: Imperial Model: 97353 Part Number: 97353
"IMPERIAL" QUICK DISCONNECT COUPLER BODY
Body Style: 3/8"
Female NPT: 3/8"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler body.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$15.89 |
 | IMPERIAL 97354 QUICK DISCONNECT COUPLER BODY 1/4"MNPT - LINCOLN
Brand: Imperial Model: 97354 Part Number: 97354
"IMPERIAL" QUICK DISCONNECT COUPLER BODY
Male NPT: 1/4"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler body.
Male Pipe Thread, Lincoln Design.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$14.99 |
 | IMPERIAL 97355 QUICK DISCONNECT COUPLER BODY 1/4"x1/4"FNPT - LINCOLN
Brand: Imperial Model: 97355 Part Number: 97355
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Female NPT: 1/4
Female Pipe Thread, Lincoln Design. | *$14.99 |
 | IMPERIAL 97357 QUICK DISCONNECT COUPLER 1/2x1/2FNPT - TRU FLATE DESIGN
Brand: Imperial Model: 97357 Part Number: 97357
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Style: 1/2"
Female NPT: 1/2"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Body Female Pipe Thread, Industrial or Automotive (Tru-Flate) Design. | *$19.29 |
 | IMPERIAL 97358 QUICK DISCONNECT COUPLER PLUG 1/2X1/2FNPT - TRU FLATE DESIGN
Brand: Imperial Model: 97358 Part Number: 97358
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/2"
Female NPT: 1/2"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Heavy-duty quick disconnect coupler body.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Body Female Pipe Thread, Automotive (Tru-Flate) Design. | *$5.89 |
| IMPERIAL 97360 QUICK DISCONNECT COUPLER PLUG 1/4X1/4FNPT(PACK OF 2)
Brand: Imperial Model: 97360 Part Number: 97360
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$5.99 |
 | IMPERIAL 97361 QUICK DISCONNECT COUPLER PLUG 1/4"x1/4"MNPT(PACK OF 2)
Brand: Imperial Model: 97361 Part Number: 97361
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Male NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$4.89 |
 | IMPERIAL 97362 QUICK DISCONNECT COUPLER PLUG 3/8"x3/8"MNPT(PACK OF 2)
Brand: Imperial Model: 97362 Part Number: 97362
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Male NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$6.69 |
| IMPERIAL 97363 QUICK DISCONNECT COUPLER PLUG 3/8X3/8FNPT(PACK OF 2)
Brand: Imperial Model: 97363 Part Number: 97363
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Female NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 97364 QUICK DISCONNECT COUPLER PLUG 1/4"x1/4"MNPT - LINCOLN DESIGN(PACK OF 2)
Brand: Imperial Model: 97364 Part Number: 97364
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Male NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Lincoln Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$7.69 |
 | IMPERIAL 97365 QUICK DISCONNECT COUPLER PLUG 1/4"x1/4"FNPT - LINCOLN DESIGN (PACK OF 2)
Brand: Imperial Model: 97365 Part Number: 97365
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Lincoln Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
| | IMPERIAL 97366 MANIFOLD COUPLING 1/4"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97366 Part Number: 97366
"IMPERIAL" MANIFOLD COUPLING
NPT: 1/4"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.59 |
| | IMPERIAL 97367 MANIFOLD COUPLING 3/8"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97367 Part Number: 97367
"IMPERIAL" MANIFOLD COUPLING
NPT: 3/8"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.19 |
