Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2
*$419.99
Priority Flow Divider - 30 GPM Capacity
Brand: Prince   
Divider has adjustable orifice. Rated up to 3000 PSI. Priority flow divider separates one input flow into two output flows. 0-30 GPM capacity. Priority flow is adjustable. One flow is constant and unaffected by input flow variations or load changes. The other port is an excess flow that can provide another circuit. 3/4in. ports.
*$94.99
Prince Control Valve - 4-Way/3-Position, Detent, Model# SVW1BB1
Brand: Prince   
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A. Inlet Port (in.): #10 SAE, Working Port (in.): #8 SAE, Max. PSI: 3,000, Max. Flow (GPM): 12, Adjustable Release Pressure PSI: 1,500 - 3,000
*$89.99
Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 16in. Stroke, 1 1/2in. Shaft, Model# PMC-8316
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 1/2
*$189.99
Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2
*$349.99
Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 12in. Stroke, 1 3/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 3/8
*$189.99
Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 16in. Stroke, 1 3/8in. Shaft, Model# PMC-5416
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 3/8
*$179.99
Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 30in. Stroke, 1 3/4in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 40 1/4, Shaft Diameter (in.): 1 3/4
*$299.99
Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 36in. Stroke, 1 3/4in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 46 1/4, Shaft Diameter (in.): 1 3/4
*$319.99
Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 1/2
*$159.99
Prince Tie-Rod Cylinder - 3000 PSI, 3in. Bore, 16in. Stroke, 1 3/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 1 3/8
*$179.99
Prince Bolt Kit for 2 Spools
Brand: Prince   
Each kit contains: 3 bolts, 6 nuts and 6 washers.
*$9.99
Prince Tie-Rod Cylinder - 2500 PSI, 3in. Bore, 8in. Stroke, 1 1/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8
*$149.99
Prince Motor Spool Open Center Control Valve - 20 GPM, Model# RD-2575-T4-EDA1
Brand: Prince   
Valve will detent in both directions. Relief valve preset at 1500 PSI; adjustable to 3000 PSI. 3/4in. inlet and outlet, 1/2in. working ports. Motor locks in neutral. Includes motoring spool. 20 GPM flow rate. 3-year limited warranty. U.S.A.
*$99.99
Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 30in. Stroke, 2in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2
*$379.99
Prince One Spool Control Valve, Model# HC-V-R22
Brand: Prince   
4-way with floats; has balanced spools with select fit. Load checks to prevent load drops when shifting directions. Good for use on snowplows, dozers, loaders etc. Float valves allow blade or bracket to float along ground. Will accept power beyond plug conversion. Preset at 2000 PSI. Adjustable from 1500 to 3000 PSI. USA
*$159.99
Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 24in. Stroke, 1 3/4in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/4
*$289.99
Prince Tie-Rod Cylinder - 2500 PSI, 4in. Bore, 8in. Stroke, 2in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 2
*$229.99
Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 16in. Stroke, 2in. Shaft, Model# PMC-5616
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 16, Closed Pin Center (in.): 25, Shaft Diameter (in.): 2
*$249.99
Prince High-Pressure Control Valve, Model# SVE22
Brand: Prince   
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. Power beyond plug capability. U.S.A.
*$49.99
Prince Tie-Rod Cylinder - 2500 PSI, 2in.Bore, 10in.Stroke, 1in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 10, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1
*$139.99
Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 8in. Stroke, 1 3/8in. Shaft, Model# PMC-5408
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All-steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 3/8
*$149.99
Prince Control Valve - 4-Way/3-Position Cylinder Spool, Model# SVW1BA1
Brand: Prince   
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A. Max. Flow (GPM): 12, Inlet Port (in.): 7/8-14 ORB, Outlet Port (in.): 7/8-14 ORB, Working Port (in.): 3/4-16 ORB,, Max. PSI: 3,000, Directional Control: 4 way, 3 position, Adjustable Release Pressure PSI: 1,500 - 3,000
*$79.99
Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 39, Shaft Diameter (in.): 2
*$309.99
Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 48, Closed Pin Center (in.): 58, Shaft Diameter (in.): 2
*$419.99
Prince Standard 3-Way Control Valve, Model# RD-2575-T3-ESA1
Brand: Prince   
A control valve for operating single-acting cylinders. This valve has 3 ports, 3-position spring center to neutral and adjustable relief valve. Relief valve preset at 1500 PSI, adjusts up to 3000 PSI. Convertible from open to closed center. 3/4in. in/out ports, 1/2in. working ports. U.S.A.
*$109.99
Prince Tie-Rod Cylinder - 3000 PSI, 3in. Bore, 18in. Stroke, 1 3/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 3/8
*$189.99
Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Brand: Prince   
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
*$479.99
Prince Standard 4-Way Control Valve, Model# RD2575T4ESA1
Brand: Prince   
Up to 20 GPM with 4 ports. Factory pre-set at 1500 PSI, has adjustable relief valve. For lower pressure, turn counter-clockwise. Adjustable from 1000 to 3000 PSI. Precision honed and plated, spools are hydraulically balanced. Spring centered. 3/4in. inlet/outlet ports, 1/2in. work ports. USA
*$99.99
Prince Heavy Duty Hydraulic Motor - 14 GPM, 1800 PSI, Model# ADM200-4RP
Brand: Prince   
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. Mounting Type: 4 bolt, Shaft Dimensions Diameter x L (in.): 1 x 1 3/4, Port Size (in.): 1/2 NPTF, Displacement (cu. in.): 12.15, Max. RPM: 400, Max. PSI: 1,800, Max. Torque (in.-lbs.): 2,305, Max. Flow (GPM): 14
*$279.99
Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 12in. Stroke, 1 3/4in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 3/4
*$229.99
Prince Adjustable Relief Valve - 1/2in., Model# RD-1850-H
Brand: Prince   
This compact relief valve is adjustable to 2500 PSI.
*$49.99
Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 20in. Stroke, 2in. Shaft, Model# PMC-5620
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 20, Closed Pin Center (in.): 29, Shaft Diameter (in.): 2
*$269.99
Prince Control Valve - Inlet Section, Model# SVI25
Brand: Prince   
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. U.S.A.
*$49.99
Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 12in. Stroke, 1 3/8in. Shank, Model# PMC-5412
Brand: Prince   
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 20, Shaft Diameter (in.): 1 3/8
*$159.99
Prince 3 Spool Control Valve, Model# HC-V-R21
Brand: Prince   
Three spool control valve with float on one spool. Load checks each spool, to 25 GPM. Relief valve preset at 2000 PSI; adjusts from 1500-3000 PSI. Power beyond capacity. 3/4in. inlet/outlet ports, 1/2in. work ports. USA
*$319.99
Prince Two-Way Detent Valve, Model# LS-3010-2
Brand: Prince   
For open center systems. Two-way detent; 3/4in. in/out 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. USA
*$99.99
Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 16in. Stroke, 1 3/4in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/4, Shaft Diameter (in.): 1 3/4
*$249.99
Prince SP20 Series Hydraulic Gear Pump - .976 Cu. In., CCW, Model# SP20B16A9H4-L
Brand: Prince   
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A.
*$209.99
Prince Tie-Rod Cylinder - 3000 PSI, 2in. Bore, 8in. Stroke, 1 1/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8
*$129.99
Prince Directional Control Valves-Inlet Section, Model# 2012H
Brand: Prince   
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20.
*$89.99
Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 18in. Stroke, 2in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 18, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 2
*$349.99
Prince Bolt Kit for 4 Spools
Brand: Prince   
Each kit contains: 3 bolts, 6 nuts and 6 washers.
*$9.99
Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 10in. Stroke, 1 3/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 10, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 3/8
*$179.99
Prince Control Valve - 3 Way/3 Position, Model# SVW1AA1
Brand: Prince   
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with single-acting cylinders. U.S.A. Max. Flow (GPM): 12, Inlet Port (in.): 7/8-14 ORB, 10 SAE, Outlet Port (in.): 7/8-14 ORB, 10 SAE, Working Port (in.): 3/4-16 ORB, 8 SAE, Max. PSI: 3,000, Directional Control: 3 way, 3 position, Adjustable Release Pressure PSI: 1,500 - 3,000
*$79.99
Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2
*$389.99
Prince Tie-Rod Cylinder - 3000 PSI, 2in. Bore, 16in. Stroke, 1 1/8in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 1 1/8
*$144.99
Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CW, Model# SP20B20A9H4-R
Brand: Prince   
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A.
*$219.99
Prince Two-Spool Control Valve, Model# RD522GCGA5A4B1
Brand: Prince   
Two spool to 25 GPM. With one standard 4-way port and one float. 3/4in. inlet and outlet ports; 1/2in. working ports. Valve will accept power beyond conversion plug. Internal load check. Relief pressure set at 2000 PSI; adjustable from 1500 PSI to 3000 PSI. Load check for each valve. U.S.A.
*$219.99
Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2 in. Bore, 30in. Stroke, 2in. Shaft
Brand: Prince   
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2
*$389.99
 
eBay Results
 TitlePriceShippingTotalCurrencyTime Left
Pneumatic solenoid valve 1" NPT 3-way normally closed 24.5015.0039.50USD 46 minutes 6 seconds
Servo motor for a CNC machine,Plasma,WaterJet185.0015.00200.00USD 1 hour 58 minutes 6 seconds
O-Ring Assortment Set 62pc Professional 12 asst o ring3.003.506.50USD 5 hours 7 minutes 17 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 50 minutes 52 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 51 minutes 25 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 51 minutes 50 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 52 minutes 21 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 52 minutes 52 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 53 minutes 26 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 53 minutes 58 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 54 minutes 26 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 55 minutes 14 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 56 minutes 5 seconds
Industrial Hydraulic Cylinder, Double Acting 40mm Bore86.490.0086.49USD 6 hours 56 minutes 36 seconds
VICKERS PVH98 HYDRAULIC PISTON PUMP SEAL KIT75.007.0082.00USD 6 hours 59 minutes 1 second
VICKERS PVH74 HYDRAULIC PISTON PUMP SEAL KIT70.007.0077.00USD 7 hours 1 minute 2 seconds
VICKERS PVH57 HYDRAULIC PISTON PUMP SEAL KIT65.007.0072.00USD 7 hours 2 minutes 33 seconds
Industrial Hydraulic Knockout Cylinder Threaded Body81.110.0081.11USD 7 hours 13 minutes 47 seconds
HYDRAULIC CYLINDER100.0020.00120.00USD 7 hours 14 minutes 6 seconds
Industrial Hydraulic Knockout Cylinder Threaded Body81.110.0081.11USD 7 hours 14 minutes 54 seconds
Industrial Hydraulic Knockout Cylinder Threaded Body81.110.0081.11USD 7 hours 15 minutes 23 seconds
Industrial Hydraulic Knockout Cylinder Threaded Body81.110.0081.11USD 7 hours 15 minutes 50 seconds
Industrial Hydraulic Knockout Cylinder Threaded Body81.110.0081.11USD 7 hours 16 minutes 15 seconds
Industrial Hydraulic Knockout Cylinder Threaded Body81.110.0081.11USD 7 hours 16 minutes 40 seconds
ENERPAC 30 TON HOLLOW HYDRAULIC CYLINDER H-302299.9915.00314.99USD 7 hours 18 minutes 35 seconds
ENERPAC 30 TON HYDRAULIC CYLINDER RLC-302249.9915.00264.99USD 7 hours 21 minutes 53 seconds
TEXAS PNEUMATIC TOOL TX8 BENCH RAMMER AND TX-70B NEW265.000.00265.00USD 7 hours 23 minutes 15 seconds
ENERPAC 50 TON HYDRAULIC CYLINDER RLC-502339.9915.00354.99USD 7 hours 24 minutes 19 seconds
WEATHERHEAD T-440-1 HOSE CRIMPER BRAND NEW3999.99400.004399.99USD 7 hours 26 minutes 34 seconds
PARKER HYDRAULIC HOSE 1 1/4 INCH 150 FEET BRAND NEW2299.99200.002499.99USD 7 hours 28 minutes 53 seconds
PARKER V-PAK 7.5 HP HYDRAULIC PUMP BRAND NEW1499.90250.001749.90USD 7 hours 30 minutes 53 seconds
Parker #11971-32-32 ( 8 pieces)250.000.00250.00USD 7 hours 36 minutes 46 seconds
Dayco Eastman HFS 3/4"Firescreen 1500 p.s.i.(140 ft+++)75.000.0075.00USD 7 hours 38 minutes 11 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/4" NIB 425J339.994.0744.06USD 7 hours 43 minutes 7 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/4" NIB 417J339.9912.7052.69USD 7 hours 43 minutes 12 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/4" NIB 420J339.995.0945.08USD 7 hours 43 minutes 12 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/4" NIB 418J339.9912.7052.69USD 7 hours 43 minutes 23 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/8" NIB 422J339.995.0945.08USD 7 hours 43 minutes 25 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/8" NIB 423J339.995.0945.08USD 7 hours 43 minutes 27 seconds
PARKER GOLD RING SOLENOID UNIT VALVE 1/4" NIB 424J339.995.0945.08USD 7 hours 43 minutes 29 seconds
HYDRO LINE HYDRAULIC CYLINDER R5C-1.5 X 4.0 NEW98.000.0098.00USD 7 hours 53 minutes 44 seconds
SMC Pneumatic Air Flow Speed Controller No. AS2200 6.001.957.95USD 7 hours 56 minutes 42 seconds
ARROW PNEUMATICS FILTER ENCLOSURE F3N1-1663.000.0063.00USD 8 hours 2 minutes 11 seconds
Parker Filtration Hydraulic Filter, PN 927091, 238W DB0.997.688.67USD 8 hours 11 minutes 40 seconds
*NIB* GREENLEE 60165 DRIVE NUT 1/2"9.990.009.99USD 8 hours 14 minutes 32 seconds
3 WAY PNEUMATIC SOLENOID CONTROL VALVE, MILLER-HERION19.004.9523.95USD 8 hours 15 minutes 9 seconds
DIXON AIR REGULATOR 5131C R40-0CR NEW149.000.00149.00USD 8 hours 16 minutes 10 seconds
NEW PHD 1" BORE X 12" STROKE PNEUMATIC CYLINDER S04 NR29.110.0029.11USD 8 hours 21 minutes 38 seconds
PNEUMATIC 3 WAY LIMIT SWITCH, HERION #4021606, 1/2NPT29.004.9533.95USD 8 hours 24 minutes 15 seconds
Gemini Pneumatic Actuator 230.0015.00245.00USD 8 hours 25 minutes 18 seconds
 
Previous Page   Next Page
Jump to page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Get eBay search results without all the crap at www.theDeCrapifier.com