 | Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2 in. Bore, 30in. Stroke, 2in. Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2 | *$389.99 |
 | Adjustable Flow Control Valve - 1/2in. Port Size Brand: Prince Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-16 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Prince Directional Control Valves-Outlet Section Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$59.99 |
 | Adjustable Flow Control Valve - 3/4in. Port Size Brand: Prince Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 2in. Bore, 18in. Stroke, 1 1/8in. Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 1/8 | *$149.99 |
 | Prince Directional Control Valves-Inlet Section, Model# 2012J Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$89.99 |
 | Prince Adjustable Relief Valve, 3/4in. Brand: Prince This compact adjustable relief valve is adjustable to 3000 PSI. 20 gallon flow. | *$49.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 8in. Stroke, 1 3/8in. Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 3/8 | *$169.99 |
 | Prince Bolt Kit for 4 Spools Brand: Prince For Use With: 4 Work Sections and Inlet and Outlet Section | *$14.99 |
 | Prince Two-Spool Control Valve, Model# RD522GCGA5A4B1 Brand: Prince Two spool to 25 GPM. With one standard 4-way port and one float. 3/4in. inlet and outlet ports; 1/2in. working ports. Valve will accept power beyond conversion plug. Internal load check. Relief pressure set at 2000 PSI; adjustable from 1500 PSI to 3000 PSI. Load check for each valve. U.S.A. | *$219.99 |
 | Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CCW, Model# SP20B20A9H4-L Brand: Prince Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$259.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2in. Bore, 16in. Stroke, 2in. Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$329.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 24in. Stroke, 1 3/8in. Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/8 | *$229.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 10in. Stroke, 1 3/4in. Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 10, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 3/4 | *$229.99 |
 | Prince PTO Tractor Pump 21 GPM, Model# HC-PTO-1A Brand: Prince Part Number: 438-500 Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$499.99 |
 | 10 Ton Foot Air / Hydraulic Pump Brand: Rafael Part Number: Lic-FAHP10 ulSpecifications: li Rated Pressure: 10,000 PSI li Air Pressure: 70 - 170 PSI li Stroke Length: 1" li Oil Flow at 100 PSI li Pressure: br 30 Cu.In/Min. at 0 PSI br 8 Cu.In/Min. at 10,000 PSI li Usable Oil Capacity: 42 Cu.In (690 cc) li Air Cunsumption: 10 CFM li Air Inlet: 1/4 NPT br Weight: 22.95 Lbs/ul | *$129.75 |
 | 8 Ton Air/Hydraulic Long Ram Jack - Small Base Brand: Raffael Tools Part Number: Lic AJ8 - Capacity 8 Tonbr - Replacement For 2 Ton Engine Hoistbr - Height: 24-1/5"br - Pick Height: 43-1/2"br - Stroke: 18.9"br - Ram Diameter: 1.4"br - Air Pressure Range: 0.8 - 0.95 Mpabr Weight: 41.25 Lbs | *$106.30 |
 | 10 Ton Hydraulic Porta Power Brand: Raffael Tools Part Number: pp10 ulbr li Color or Model May Very br Contents:br - Hydraulic Pumpbr - Jack Hosebr - 10 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 75 Lbs/li/ul | *$157.33 |
 | Pull Back Ram for 10 Ton Porta Power Brand: Raffael Tools Part Number: pp10-pbr Stroke: 130mmbr Material: Steelbr Capacity: 10 Tonbr Color: Red body with black hookbr Weight: 15 Lbs | *$64.53 |
 | Pull Back Ram for 10 Ton Porta Power - Heavy Duty Brand: Raffael Tools Part Number: pp10-pbr-hd li Stroke: 6" li Material: Steel li Capacity: 10 Ton br Weight: 19.95 Lbs | *$172.09 |
 | 4 Ton Hydraulic Porta Power Brand: Raffael Tools Part Number: pp4 ulbr li Color or Model May Very br Contents:br - Hydraulic Pumpbr - Jack Hosebr - 4 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 47 Lbs br Updated on 7/7/2005/li/ul | *$98.07 |
 | RapidAir Union Elbow Fitting - 1/2in., Model# 50300 Brand: RapidAir RapidAir union elbow fitting (along with other RapidAir components, sold separately) enables you to expand your compressed air piping system, putting air lines exactly where you want them. Simply push air compressor tubing into the fitting until seated. Tubing can be removed by pushing on release button. Molded mounting hole makes for clean installation appearance. U.S.A. Fitting Size (in.): 1/2, Degree of Angle ( deg ): 90 | *$3.49 |
 | Red Lion Welded Cylinder - 2500 PSI, 14in. Stroke, Model# 25WC14-150 Brand: Red Lion Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$159.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 30in. Stroke, Model# 25WC30-150 Brand: Red Lion Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$219.99 |
 | Red Lion Welded Double-Acting Cylinder - 2500 PSI, 36in. Stroke, Model# 25WC36-150 Brand: Red Lion Excellent for loaders, engine hoists and small boom conveyors. 1 1/2in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$229.99 |
 | 1 1/16 Bore x 5. Stroke, Double Acting, Nose Mount, ARO Composite Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: ARO-125 1-1/16" Bore | *$37.36 |
 | 1/4 NPT Port, 14 SCFM Flow, 2-25 Spring Range, ARO Precision Air Regulators (1 Each) Brand: Reid Supply Company Part Number: ARO-15 Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 3/8 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each) Brand: Reid Supply Company Part Number: ARO-20 Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 1/8 NPT Port, 15.4 SCFM Flow, ARO Flow Control Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-355 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$18.87 |
 | 1/4 NPT Port, 24.9 SCFM Flow, ARO Flow Control Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-360 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$22.53 |
 | 3/8 NPT Port, 50.4 SCFM Flow, ARO Flow Control Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-365 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$28.46 |
 | 1/8 NPT Port, 15.4 SCFM Flow, ARO Needle Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-375 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$16.14 |
 | 1/4 NPT Port, 24.9 SCFM Flow, ARO Needle Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-380 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$20.38 |
 | 3/8 NPT Port, 50.4 SCFM Flow, ARO Needle Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-385 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$27.89 |
 | 1/2 NPT Port, 85.3 SCFM Flow, ARO Needle Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-390 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$34.81 |
 | 1/8 NPT, 120 V AC, 3-Way Body Ported, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-395 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
 | 1/8 NPT, 24 V DC, 3-Way Body Ported, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-400 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
 | 1/8 NPT, 12 V DC, 3-Way Body Ported, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-405 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
 | 1/8 NPT, 120 V AC, 4-Way Body Ported, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-425 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$57.40 |
 | 1/8 NPT, 24 V DC, 4-Way Body Ported, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-430 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$54.03 |
 | 1/8 NPT, 12 V DC, 4-Way Body Ported, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-435 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$53.68 |
 | 1/8 NPT, 12 V DC, 4-Way Body Ported, ARO Selenoid Valves, w/Speed Control (1 Each) Brand: Reid Supply Company Part Number: ARO-450 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$64.89 |
 | 1/8 NPT, 120 V AC, 4-Way Stacking, ARO Selenoid Valves, w/o Speed Control (1 Each) Brand: Reid Supply Company Part Number: ARO-455 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$63.94 |
 | 1/8 NPT, 120 V AC, 4-Way Stacking, ARO Selenoid Valves, w/Speed Control (1 Each) Brand: Reid Supply Company Part Number: ARO-470 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$66.59 |
 | 1/8 NPT, 12 V DC, 4-Way Stacking, ARO Selenoid Valves, w/Speed Control (1 Each) Brand: Reid Supply Company Part Number: ARO-480 Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$71.38 |
 | 1/4" Stacking End Plate Kits for 4-Way Stacking, ARO Selenoid Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-490 Stacking End Plate Kit | *$16.03 |
 | 1/4 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each) Brand: Reid Supply Company Part Number: ARO-5 Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 1/4 NPT Port, 29.5 SCFM Flow, ARO Check Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-500 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$18.43 |
 | 3/8 NPT Port, 46.9 SCFM Flow, ARO Check Valves (1 Each) Brand: Reid Supply Company Part Number: ARO-505 Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$21.09 |
 | 3/4 Bore x 1/2 Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each) Brand: Reid Supply Company Part Number: ARO-605 Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$48.87 |
|