 | Stainless Steel 300 Gear Clamps, Nominal Size 16-7/8"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 16-7/8", Min. Size 15.38", Max. Size 17.38", Pack of 11 | *$5.29 |
 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 13/32" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 13/32", OD.0.77", Working Pressure 2000 PSI, Min. Burst Pressure 8000 PSI, Min. Bend Radius 4.6", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.27 Lbs., Box Package | *$5.09 |
 | Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/8", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$10.00 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 30"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 30" | *$59.11 |
 | Brass SAE 45 Hydraulic Female Swivel Coupling, Thread Size 7/16-20"
Brand: IWS
Brass SAE 45 Hydraulic Female Swivel Coupling, Thread Size 7/16-20", Hose ID 3/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, Three piece style fitting, Require an adapter for assembly, 1 Per Case | *$4.80 |
 | Heavy Duty Bolt Clamp, 130 mm to 140 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 130 mm to 140 mm, Pack of 10 | *$15.29 |
 | Air Brake Compression Female NPT Connector, 1/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Female NPT Connector, 1/8" Pipe Size, 3/8" tube size | *$5.69 |
 | Push-To-Connect Air Brake Fittings, Bulkhead Union, Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, Bulkhead Union, 3/8" x 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$15.40 |
| Heavy Duty Bolt Clamp, 55 mm to 59 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 55 mm to 59 mm, Pack of 10 | *$6.38 |
 | Male NPT Air Brake Insert 1/2" Pipe Size, 3/8" Hose ID
Brand: IWS
Male NPT Air Brake Insert 1/2" Pipe Size, 3/8" Hose ID | *$3.04 |
| Stainless Steel 300 Gear Clamps, Nominal Size 13-1/4"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 13-1/4", Min. Size 11.75", Max. Size 13.75", Pack of 10 | *$4.51 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 7/8" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 7/8", OD.1.23", Working Pressure 800 PSI, Min. Burst Pressure 3200 PSI, Min. Bend Radius 7.4", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.50 Lbs., Box Package | *$9.22 |
| Stainless Steel 300 Gear Clamps, Nominal Size 2-1/2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 2-1/2", Min. Size 2.06", Max. Size 3.00", Pack of 10 | *$1.27 |
 | Reusable Hydraulic Male Inverted Flare Coupling, Thread Size 3/4-18
Brand: IWS
Reusable Hydraulic Male Inverted Flare Coupling, Thread Size 3/4-18", Hose ID 13/32", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$19.11 |
| Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/4"
Brand: IWS
Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/4", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$23.53 |
 | Air Brake Compression Male NPT Connector, 1/4" tube size to 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Connector, 1/4" tube size to 1/2" tube size | *$4.80 |
| Stainless Steel 300 Gear Clamps, Nominal Size 5"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 5", Min. Size 3.50", Max. Size 5.50", Pack of 10 | *$1.86 |
| | Type "B" Welding Hose Nut Acetylene Type, 9/16-18 Left Thread Size
Brand: IWS
Type "B" Welding Hose Nut Acetylene Type, 9/16-18 Left Thread Size | *$1.27 |
| Heavy Duty Bolt Clamp, 68 mm to 73 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 68 mm to 73 mm, Pack of 10 | *$8.82 |
 | Air Brake Compression Union Tee, 1/2" tube size
Brand: IWS
Air Brake Compression Union Tee, 1/2" tube size, | *$12.84 |
 | Air Brake Compression Male NPT Branch Tee, 1/4" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 1/4" Pipe Size, 3/8" tube size | *$7.16 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/8", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$6.27 |
| Stainless Steel 300 Gear Clamps, Nominal Size 3"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 3", Min. Size 2.56", Max. Size 3.50", Pack of 10 | *$1.42 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18", Hose ID 1/4", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 1 Per Case | *$5.49 |
 | Ground Plug Drain Valve, 3?8"
Brand: IWS
Ground Plug Drain Valve, Pipe size 3?8" NPT | *$14.51 |
| | gear Clamps
Brand: IWS
Micro Carbon Steel Gear Clamp, 1/2" Nominal Size, 0.44" Min Size, 1.00" Max Size, 10 Per Case | *$0.72 |
 | Air Brake Compression Union, 1/4" tube size
Brand: IWS
Air Brake Compression Union, 1/4" tube size | *$2.75 |
 | Reusable Hydraulic SAE 45 Degree Male Coupling, Thread Size 7/8-14
Brand: IWS
Reusable Hydraulic SAE 45 Degree Male Coupling, Thread Size 7/8-14", Hose ID 1/2", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$24.11 |
 | Air Brake Compression 90° Male NPT Connector, 1/4" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 1/4" Pipe Size, 1/2" tube size | *$6.27 |
 | Air Brake Hose Assembly 1/4" NPT 3/8" ID 34" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 34" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.81 |
 | Push-To-Connect Air Brake Fittings,Union Tee 5/32
Brand: IWS
Push-To-Connect Air Brake Fittings, Union Tee, 5/32" x 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$9.51 |
 | Air Brake Compression Male NPT Run Tee, 1/2" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Run Tee, 1/2" Pipe Size, 1/2" tube size | *$16.08 |
 | Carbon Steel Gear Clamps, Nominal Size 11-3/4"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 11-3/4", Min. Size 10.25", Max. Size 12.25", Pack of 10 | *$4.22 |
 | Reusable Male Inverted Flare 90 Deg. Teflon Reusable FittingThread Size 5/8-18"
Brand: IWS
Reusable Male Inverted Flare 90 Degree Teflon Reusable FittingThread Size 5/8-18"5/16", Drop Length 1.73" | *$28.33 |
 | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 3/4" Nominal Size, 0.75" Min Size, 1.13" Max Size, 10 Per Case | *$1.47 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 8.44" min. Size, 8.75" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$9.71 |
| Air Brake Compression Male NPT Connector, 3/8" tube size to 1/4" tube size
Brand: IWS
Air Brake Compression Male NPT Connector, 3/8" tube size to 1/4" tube size | *$3.14 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18"
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18", Hose ID 5/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 10 Per Case | *$10.00 |
 | Air Brake Compression 90° Female NPT Connector, 1/8" Pipe Size, 1/4" tube size
Brand: IWS
Air Brake Compression 90° Female NPT Connector, 1/8" Pipe Size, 1/4" tube size | *$4.80 |
| JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 1-5/16-12"
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 1-5/16-12", Hose ID 7/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 5 Per Case | *$37.25 |
| Air Brake Compression Male NPT Run Tee, 3/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Male NPT Run Tee, 3/8" Pipe Size, 3/8" tube size | *$8.33 |
| | Reusable Male NPT Teflon Fitting, Thread Size 1/4-18"
Brand: IWS
Reusable Male NPT Teflon Fitting, Thread Size 1/4-18", Hose ID 5/16" | *$13.92 |
 | Heavy Duty Heater Hose, ID 1"
Brand: IWS
Heavy Duty Heater Hose, ID 1", OD 1.38", Working Pressure 200 PSI @ 100 C - 85 PSI @ 165 C, Black EPDM rubber designed to withstand hot water and low-pressure steam, Reinforcement: Plies of high tensile strength yarn, Temperature Range: -40°C (-40°F) to 165°C | *$9.51 |
| Reusable Hydraulic SAE 45 Degree Male Coupling, Thread Size 5/8-18
Brand: IWS
Reusable Hydraulic SAE 45 Degree Male Coupling, Thread Size 5/8-18", Hose ID 5/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$11.86 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1-3/4" ID, Pack of 28 | *$4.22 |
| | Stainless Steel 301 Gear Clamps, Nominal Size 1?4"
Brand: IWS
Stainless Steel 301 Gear Clamps, Band Width 5/16", Nominal Size 1?4", Min. Size 0.22", Max. Size 0.63", Pack of 10 | *$0.61 |
| Reusable Hydraulic Male Inverted Flare Coupling, Thread Size 1/2-20
Brand: IWS
Reusable Hydraulic Male Inverted Flare Coupling, Thread Size 1/2-20", Hose ID 1/4", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$16.76 |
 | Reusable Male Inverted Flare 45 Deg. Elbow Teflon Fitting, Thread Size 3/4-18"
Brand: IWS
Reusable Male Inverted Flare 45 Degree Elbow Teflon Fitting, Thread Size 3/4-18", Hose ID 13/32", Cut-Off Length 0.93" | *$23.24 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 3/4-16"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 3/4-16"Hose ID 13/32", Drop Length 2.43"Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$24.60 |
| | Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 7/8-14"
Brand: IWS
Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 7/8-14", Hose ID 1/2" | *$27.75 |
|
