 | Push-To-Connect Air Brake Fittings, 90 Deg. Male Elbow, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Male Elbow, Pipe Size 1/8", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$4.71 |
 | Heavy Duty Bolt Clamp, 91 mm to 97 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 91 mm to 97 mm, Pack of 10 | *$9.60 |
 | Push-To-Connect Air Brake Fittings, Male, Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, Male, Pipe Size 3/8", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$5.49 |
 | SAE Stainless-Steel Braided Teflon Hose Hose ID 1/4"
Brand: IWS
SAE Stainless-Steel Braided Teflon Hose Hose ID 1/4", Hose OD 0.38", Working Pressure 3000, Min. Burst Pressure 12000 PSI, Min Bend Radius 3.0", Extruded Teflon, Reinforcement: One high-tensile Type 304 stainless steel wire braid, Temperature Range: -54° to 232°C (-65° to 450°F), Intermittent -73° to 260°C (-100° to 500°F)0.10 Lbs. Per Ft. | *$5.09 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 10-1/4"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 10-1/4", Min. Size 1.75", Max. Size 10.75", Pack of 10 | *$3.53 |
 | Air Brake Compression Union Tee, 5/8" tube size
Brand: IWS
Air Brake Compression Union Tee, 5/8" tube size, | *$22.25 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 3/8" ID, Pack of 11 | *$2.35 |
 | Reusable Hydraulic JIC 37 Deg. Female, Long 90 Deg. Elbow, Thread Size 1·5/16-12"
Brand: IWS
Reusable Hydraulic JIC 37 Deg. Female, Long 90 Deg. Elbow, Thread Size 1·5/16-12", Hose ID 7/8", Drop Length 4.58", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$88.43 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 10.25" min. Size, 10.56" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$10.00 |
| | gear Clamps
Brand: IWS
Micro Carbon Steel Gear Clamp, 2-1/8" Nominal Size, 1.81" Min Size, 2.50" Max Size, 10 Per Case | *$1.27 |
| | Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 7/16-20"
Brand: IWS
Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 7/16-20", Hose ID 3/16" | *$14.60 |
 | Silicone Coolant Hose, 25/8"
Brand: IWS
Silicone Coolant Hose, 2-5/8" ID x 3 OD, Working Pressure 35 PSI, 4 Feet Per Case | *$37.45 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 2.50" min. Size, 2.81" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.25 |
| | Air Brake Assembly Adapter, Pipe Size1/4" Hose ID 3/8"
Brand: IWS
Air Brake Assembly Adapter, Pipe Size1/4" Hose ID 3/8" | *$2.45 |
 | Male NPT Fitting With Spring, 1/4" Pipe Size, 3/8" Hose ID
Brand: IWS
Male NPT Fitting With Spring, 1/4" Pipe Size, 3/8" Hose ID | *$7.25 |
| Silicone Coolant Hose, 11/8"
Brand: IWS
Silicone Coolant Hose, 1-1/8" ID x 1.5 OD, Working Pressure 75 PSI, 4 Feet Per Case | *$20.58 |
 | SAE Ball Sleeve Teflon Reusable Fitting
Brand: IWS
SAE Ball Sleeve Teflon Reusable Fitting, Thread 13/16-18, Hose ID 1/2" | *$34.22 |
| Silicone Coolant Hose, 4"
Brand: IWS
Silicone Coolant Hose, 4" ID x 4.37" OD, Working Pressure 10 PSI, 4 Feet Per Case | *$57.65 |
 | Air Brake Compression 45° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 45° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size | *$10.58 |
 | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 1/2" Nominal Size, 0.63" Min Size, 0.81" Max Size, 10 Per Case | *$1.47 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Female Elbow, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Female Elbow, Pipe Size 1/8", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$7.84 |
| Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/8", Hose Size 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$6.96 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 7.25" min. Size, 7.56" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$8.92 |
 | Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 1/2" tube size | *$5.69 |
 | Push-To-Connect Air Brake Fittings,Swivel Male Run Tee,Pipe Size 1/4"
Brand: IWS
Push-To-Connect Air Brake Fittings,Swivel Male Run Tee,Pipe Size 1/4", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$9.60 |
 | Air Brake Compression Union Elbow, 5/8" tube size
Brand: IWS
Air Brake Compression Union Elbow, 5/8" tube size | *$17.25 |
 | Carbon Steel Gear Clamps, Nominal Size 4-1/2"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 4-1/2", Min. Size 3.00", Max. Size 5.00", Pack of 10 | *$1.27 |
 | Air Brake Compression Male NPT Branch Tee, 1/8" Pipe Size, 1/4" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 1/8" Pipe Size, 1/4" tube size | *$6.86 |
| Air Brake Compression Male NPT Branch Tee, 1/2" Pipe Size, 3/4" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 1/2" Pipe Size, 3/4" tube size | *$40.00 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 24"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 24" | *$104.71 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 36"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 36" | *$114.91 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 7/8-14"
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 7/8-14", Hose ID 1/2", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 5 Per Case | *$19.91 |
| Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 5/8" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 5/8" tube size | *$12.16 |
| Air Brake Compression Male NPT Branch Tee, 3/8" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 3/8" Pipe Size, 1/2" tube size | *$10.49 |
 | Air Brake Hose Assembly 1/4" NPT 3/8" ID 36" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 36" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.91 |
| Air Brake Hose Assembly 3/8" NPT 1/2" ID 84" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 84" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$22.36 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 18" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 18" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.55 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 22" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 22" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.07 |
| Air Brake Hose Assembly 3/8" NPT 1/2" ID 34" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 34" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$12.67 |
| Air Brake Hose Assembly 1/4" NPT 3/8" ID 34" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 34" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.81 |
| Air Brake Hose Assembly 3/8" NPT 1/2" ID 16" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 16" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.60 |
| Air Brake Hose Assembly 1/4" NPT 3/8" ID 40" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 40" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$10.51 |
| Air Brake Hose Assembly 1/4" NPT 3/8" ID 22" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 22" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.27 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 12" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 12" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.21 |
| Air Brake Hose Assembly 3/8" NPT 1/2" ID 12" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 12" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.19 |
| Air Brake Hose Assembly 1/4" NPT 3/8" ID 18" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 18" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.51 |
| Air Brake Hose Assembly 3/8" NPT 1/2" ID 36" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 36" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$12.86 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 28" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 28" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.78 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 72" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 72" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$13.99 |
 | Rubber Air Brake Hose, 3/8"
Brand: IWS
3/8" Rubber Air Brake Hose, 250 Feet Per Case | *$1.38 |
