 | Jones Stephens Corp. C14207R Brass Compression Coupling Ips No Led 3/4" x 3"
Brand: Jones Stephens Model: C14207R Part Number: C14207R
"JONES STEPHENS" COMPRESSION COUPLING
Lo lead
Cts : 1"
IPS x Length : 3/4" x 3"
For use on galvanized pipe and copper tubing
Factory assembled and requires no threading, flaring, soldering or welding to install
Insert plain end of pipe in fitting and tighten the nut
Neoprene gasket makes a perfect seal and is not affected by the properties of air, water, gas, butane or propane
Withstands high pressures and temperatures
Used where a cut must be made in existing lines and for hard to get at repair or installation jobs. | *$15.99 |
 | Hydraulic Gear Pump 2 cc/rev. (0.12 cu.in./rev) SAE AA- 2 bolt Flange;1/2" Shaft with SAE straight key
Brand: JP Hydrotech Model: JP10-2/F11/S2/S/#8/U1/R Part Number: BS15-81200
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE AA 2 bolt type flange (2) Shaft : 1/2" diameter with a SAE square key 1/8 x 5/8 (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump. | *$69.00 |
 | Hydraulic Gear Pump 4 cc/rev. (0.24 cu.in./rev) SAE AA- 2 bolt Flange; 1/2" Shaft with SAE straight key
Brand: JP Hydrotech Model: JP10-4/F11/S2/S/#8/U1/R Part Number: BS15-81400
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE AA 2 bolt type flange (2) Shaft : 1/2" diameter with a SAE square key 1/8 x 5/8 (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump. | *$72.00 |
 | Hydraulic Gear Pump 6 cc/rev. (0.37 cu.in./rev) SAE AA- 2 bolt Flange; 1/2" Shaft with SAE straight key
Brand: JP Hydrotech Model: JP10-6/F11/S2/S/#8/U1/R Part Number: BS15-81600
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE AA 2 bolt type flange (2) Shaft : 1/2" diameter with a SAE square key 1/8 x 5/8 (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump. | *$75.00 |
 | Hydraulic Gear Pump 12 cc/rev. (0.73 cu.in./rev) SAE A- 2 bolt Flange; 9T Spline shaft
Brand: JP Hydrotech Model: JP20-12/F21/S41/S/U3/U2/R Part Number: AS29-81200
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE A 2 bolt type flange (2) Shaft : 9T Spline 16/32 SAE J498 B (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump | *$136.00 |
 | Hydraulic Gear Pump 16 cc/rev. (0.98 cu.in./rev) SAE A- 2 bolt Flange; 11T Spline shaft
Brand: JP Hydrotech Model: JP20-16/F21/S43/S/U4/U2/R Part Number: AS27-81600
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE A 2 bolt type flange (2) Shaft : 11T Spline 16/32 SAE J498 B (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump | *$139.00 |
 | Hydraulic Gear Pump 22 cc/rev (1.34 cu.in./rev) SAE A-2 bolt Flange; 11T Spline shaft
Brand: JP Hydrotech Model: JP20-22/F21/S43/S/U4/U2/R Part Number: AS27-82200
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE A 2 bolt type flange (2) Shaft : 11T Spline 16/32 SAE J498 B (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump | *$142.00 |
 | Hydraulic Gear Pump 26 cc/rev. (1.59 cu.in./rev) ; SAE A-2 bolt Flange; 11T Spline shaft
Brand: JP Hydrotech Model: JP20-26/F21/S43/S/U4/U2/R Part Number: AS27-82600
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE A 2 bolt type flange (2) Shaft : 11T Spline 16/32 SAE J498 B (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump | *$145.00 |
 | Hydraulic Gear Pump 8 cc/rev. (0.49 cu.in./rev) SAE A- 2 bolt Flange; 9T Spline shaft
Brand: JP Hydrotech Model: JP20-8/F21/S41/S/U3/U2/R Part Number: AS29-80800
Compact and lightweight aluminum gear pump featuring 12 tooth low noise and low ripple gear design. All parts are manufactured in the ISO certified state-of-art-facility in Korea. This high quality gear pump is used by world-class original equipment manufacturers. 3 things to check to ensure proper installation (1) Mount : Make sure that it is SAE A 2 bolt type flange (2) Shaft : 9T Spline 16/32 SAE J498 B (3) Rotation : CW (Clockwise looking at the shaft end, R) Rotation is reversible if you have basic skill to disassemble and assemble the pump | *$132.00 |
 | Udor Hydraulic Motor Mounting Kit
Brand: justudorpumps.com Model: jup_4155_00 Part Number: jup_4155_00
The Udor Hydraulic Motor Mounting Kit comes with a 2-bolt, A-mount hydraulic motor mounting flange, 1" female keyed shaft and mounting bolts. | *$179.51 |
 | Udor Model 5027.75 Gearbox
Brand: justudorpumps.com Model: jup_5027_75 Part Number: jup_5027_75
This Udor Model 5027.75 Gearbox comes ready to couple to the following pumps: RO 70; Udor Kappa 30, 40 and 55 pumps; Zeta 40 and 85 pumps; and 5 HP to 6.5 HP engines with 3/4" shafts. All Udor Gearboxes are black anodized, bearing supported and vented for longevity. | *$484.78 |
 | Udor Gear Reduction Kit
Brand: justudorpumps.com Model: jup_5034_B5 Part Number: jup_5034_B5
The Udor 16 HP to 20 HP Gear Reduction Kit is compatible with your Udor Kappa 100 and 120 pumps. These gear reduction kits are black anodized, bearing supported and vented for longevity. | *$813.12 |
 | Udor 6010.24 Regulator
Brand: justudorpumps.com Model: jup_6010_24 Part Number: jup_6010_24
The Udor 6010.24 Regulator is to be used on the Udor Kappa 40, 40GR and 55 pumps. The regulator is a pump or remote mounted control with an adjustable pressure regulator with manual dump lever. It comes with two 1/2" ball valve discharge ports and pressure gauge. Also called the Udor pressure relief valve. Note: If the Udor pump has lost pressure and all of the flow is being returned to your spray tank, then the regulator might need replacing. | *$206.47 |
 | Udor 6047.06/LP Regulator
Brand: justudorpumps.com Model: jup_6047_06_LP Part Number: jup_6047_06_LP
This Udor 6047.06/LP Regulator is for use with your Udor RO 70 and RO 70/GR-5 pumps. The regulator is a pump or remote mounted control with right angle entry from main body to adjustable pressure regulator for a much smoother operation. Comes with manual dump valve, two 1/2" ball valve discharge ports and a pressure gauge. | *$283.84 |
 | Optional 12.5 gallon Fuel Tank
Brand: justudorpumps.com Model: jup_650010 Part Number: jup_650010
An optional 12.5 gallon fuel tank is available to purchase for your Udor Kappa 120/GR and 24HP Honda engine assembly. | *$362.78 |
 | Udor Solid Keyed Shaft Kit
Brand: justudorpumps.com Model: jup_7751_A3 Part Number: jup_7751_A3
This Udor Solid Keyed Shaft Kit is a 1" solid shaft that is compatible with Udor Kappa 55, 75 and 100 pumps. | *$113.00 |
 | Udor 6-Spline Male Shaft Kit
Brand: justudorpumps.com Model: jup_7753_A6 Part Number: jup_7753_A6
This is a 1 3/8", 6-spline male PTO shaft that is compatible with your Udor Kappa 55, 75 and 100 pumps. | *$113.00 |
 | Diaphragm Repair Kit For Iota 17/18/20 - Desmopan
Brand: justudorpumps.com Model: jup_8700_01 Part Number: jup_8700_01
This Diaphragm Repair Kit is compatible with Udor Iota 17, 18 and 20 pumps. The kit comes with 1 accumulator diaphragm, 2 Desmopan or Buna diaphragms, and 4 valve assembly o-rings. | *$61.54 |
| Diaphragm Repair Kit for Kappa 30/40/T35 - Desmopan
Brand: justudorpumps.com Model: jup_8700_02 Part Number: jup_8700_02
The Diaphragm Repair Kit for Kappa 30, 40 and T35 pumps fixes and repairs damage to your existing Udor Kappa 30, 40 and T35 pumps. The kit comes with 1 accumulator diaphragm, 2 diaphragms (Desmopan or Buna) and 4 valve assembly o-rings. | *$103.87 |
| Repair Kit for Udor RO 70
Brand: justudorpumps.com Model: jup_8700_05 Part Number: jup_8700_05
This Diaphragm Repair Kit is compatible with the Udor RO 70 pump. The kit comes with 1 accumulator diaphragm, 4 valve assembly o-rings, and 2 Desmopan diaphragms. | *$107.36 |
 | Diaphragm Repair Kit for Omega 140 or Beta 110- Desmopan
Brand: justudorpumps.com Model: jup_8700_06 Part Number: jup_8700_06
This Diaphragm Repair Kit is compatible with Udor Omega 140 and Udor Beta 110 pumps. The kit includes 3 Desmopan or Buna diaphragms, 1 accumulator diaphragm, and 6 valve assembly o-rings. | *$185.20 |
 | Diaphragm Repair Kit for Omega 170 and Beta 150 Pumps - Desmopan
Brand: justudorpumps.com Model: jup_8700_07 Part Number: jup_8700_07
This Diaphragm Kit is to fix and restore your Udor Omega 170 and Udor Beta 150 pumps. The kit includes 1 accumulator diaphragm, 4 Desmopan or Buna diaphragms, and 8 valve assembly o-rings. | *$279.50 |
| Diaphragm Repair Kit for RO 160/175 - Desmopan
Brand: justudorpumps.com Model: jup_8700_09 Part Number: jup_8700_09
This Desmopan Diaphragm Repair Kit is compatible with the following Udor RO series pumps: Udor RO 160/C, RO 160/CC, RO 160/HYD or RO 175/HYDK. The kit includes 1 accumulator diaphragm, 8 valve assembly o-rings, and 4 Desmopan Piston Diaphragms. | *$197.93 |
 | Udor Kappa-75 Diaphragm Repair Kit
Brand: justudorpumps.com Model: jup_8700_10 Part Number: jup_8700_10
This Udor Kappa 75 Diaphragm Repair Kit will keep your diaphragms on your Kappa 75 Pump in good working order. Kit includes 1 accumulator diaphragm, 6 o-rings, and 3 piston desmopan diaphragms. | *$135.55 |
| Diaphragm Repair Kit for Kappa 120/150
Brand: justudorpumps.com Model: jup_8700_22 Part Number: jup_8700_22
This Diaphragm Repair Kit is compatible with the Udor Kappa 120 and 150 series pumps. The kit includes 1 accumulator diaphragm, 4 Desmopan diaphragms, and 8 valve assembly o-rings. | *$198.05 |
| Diaphragm Repair Kit (Desmopan) for Kappa 100
Brand: justudorpumps.com Model: jup_8700_24 Part Number: jup_8700_24
This Diaphragm Repair Kit (Desmopan) will fix and restore your Udor Kappa 100 pump. The kit includes 1 accumulator diaphragm, 4 desmopan diaphragms, and 8 valve assembly o-rings. | *$153.23 |
| Diaphragm Repair Kit (Desmopan) for Kappa 55/35
Brand: justudorpumps.com Model: jup_8700_26 Part Number: jup_8700_26
This Diaphragm Repair Kit (Desmopan) keeps your Udor Kappa 35 or 55 pump in good working conditions, as it helps to fix and restore your damaged diaphragms on your existing pump. Kit includes 1 accumulator diaphragm, 3 Desmopan diaphragms and 6 valve assembly o-rings. | *$94.83 |
 | Repair Kit for Udor Kappa 7, 15 or 18 Pumps - Desmopan
Brand: justudorpumps.com Model: jup_8700_27 Part Number: jup_8700_27
The Desmopan Repair Kit for Udor Kappa 7, 15 and 18 Pumps includes 4 valve o-rings, 1 accumulator diaphragm that's made of black Buna rubber and 2 main diaphragms that are desmopan or Buna. This kit is compatible with all Udor Kappa 7, 15 and 18 pumps and all of these pumps, whether mounted on a 12V electric motor or gas engines, use this kit. How to know when to purchase a repair kit: if the oil that is visible in the oil sight glass on the side of your pump is milky grey in color, then it is time to replace the diaphragms. | *$58.83 |
 | Diaphragm Repair Kit for RO 210/CC Pump
Brand: justudorpumps.com Model: jup_8700_44 Part Number: jup_8700_44
This Diaphragm Repair Kit is compatible with the Udor RO 210 and RO 250 pumps. The kit includes 6 Desmopan Diaphragms and 12 valve assembly o-rings. | *$317.57 |
 | Diaphragm Repair Kit for Kappa 33/43/53
Brand: justudorpumps.com Model: jup_8700_45 Part Number: jup_8700_45
The Diaphragm Repair Kit for Udor Kappa 33, 43 and 53 pumps fixes and repairs the diaphragms on your existing Udor Kappa 33, 43 or 53 pump. The kit comes with 3 desmopan diaphragms and 6 valve assembly o-rings. | *$96.02 |
| Repair Kit for Udor Zeta 40/85
Brand: justudorpumps.com Model: jup_8700_60 Part Number: jup_8700_60
This Diaphragm Repair Kit will fix and restore your Udor Zeta 40 and 85 pumps. The kit comes with 3 Desmopan diaphragms and 6 valve assembly o-rings. | *$105.27 |
| Diaphragm Repair Kit for Kappa 25
Brand: justudorpumps.com Model: jup_8700_65 Part Number: jup_8700_65
This Desmopan Diaphragm Repair Kit helps to fix and repair your Udor Kappa 25 or Udor Kappa 25/GR pumps. The kit includes 1 accumulator diaphragm, 2 diaphragms and 4 valve assembly o-rings. | *$99.16 |
| Diaphragm Repair Kit for RO 320/CC
Brand: justudorpumps.com Model: jup_8700_70 Part Number: jup_8700_70
This Diaphragm Repair Kit is compatible with the Udor RO 320/CC. The kit includes 6 Diaphragms, and 12 valve assembly o-rings. | *$443.84 |
 | Diaphragm Pump Saver Valve
Brand: justudorpumps.com Model: jup_9500_00 Part Number: jup_9500_00
The Diaphragm Pump Saver Valve is designed to mount between the inlet fitting on your pump and the fitter or ball valve on the intake line. Installs on the suction line before your pump. The pump saver valve is capable of relieving excess intake to prevent damage to your suction line, filter, hose and valves. | *$68.56 |
 | Pump Saver with Tee and 1" Barbs
Brand: justudorpumps.com Model: jup_9500_00tees Part Number: jup_9500_00tees
The Diaphragm Pump Saver Valve comes with a 1" tee and 1" brass hose barbs and it is designed to be used on pumps that use a 1" ID hose for suction, for instance Hydro. The valve is intended to relieve excess intake to prevent damage to your suction line, filter, hose and valves. | *$111.98 |
 | Optional Suction Assembly for High Flow Kappa
Brand: justudorpumps.com Model: jup_hfsuction Part Number: jup_hfsuction
The Optional Suction Assembly for High Flow Kappa is compatible with Udor Kappa 120 series pumps and includes a suction hose, suction filter, drain valve, suction shut-off valve and necessary fittings and hose clamps | *$303.44 |
 | Optional Supermix Jet Agitator and Return Flow Assembly
Brand: justudorpumps.com Model: jup_hhtssupermix Part Number: jup_hhtssupermix
The Supermix Agitator is constructed of PVC, Nylon and Stainless steel. This Agitator has an oversized venturi and return flow which allows excellent circulation of tank contents for improved mixing.This Agitator fits into a 100 gallon tank and needs a pump that has a volume of 8 gallons per minute or larger. This kit allows you to spray at an even rate when using wettable powders, emulsions and solutions. The Supermix is 18" long and 6" wide and must be placed near the bottom of the tank to allow for better mixing.
When installing the Supermix Agitator please follow instructions carefully. To install the Supermix you must make sure you have a hole saw that can cut a 4" round hole. There is a gasket to prevent leaking but using silicone is recommended as well.
Installation Instructions:
-Unscrew the big black nut from the white end of the Agitator.
-Cut a hole in the tank large enough for the white end of the Agitator to fit through (4")
-From the inside of the tank put the white end of the Agitator through the hole so it is sticking out of the tank.
-Make sure the rubber gasket is on the inside of the tank.
-Screw the big black nut back onto the Agitator from the outside securing it in the tank.
-Plumb your Agitation line to the 1/2" metal Male thread in the center.
-Plumb your return line to the 3/4" FNPT inlet on the one side.
-Plug the 1/2" FNPT inlet on the other side. | *$188.64 |
 | Udor Iota 18/E Replacement Pump
Brand: justudorpumps.com Model: jup_Iota-18_E Part Number: jup_Iota-18_E
This Udor Iota 18/E is a replacement pump for the Iota 17/M and Iota 18/M pumps. Udor Iota pumps are excellent for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for concrete seal coating and cleaning. | *$514.78 |
 | Udor Iota 18/M Pump
Brand: justudorpumps.com Model: jup_Iota-18_M Part Number: jup_Iota-18_M
The Udor Iota 18/M pump is a coupled with an 115V TEFC 1HP electric motor with 10-amp draw. It comes complete with an on/off switch, overload protection with manual reset, handle and base plate. The Iota 18/M pump comes equipped with a 12" stub power cord, with no plug. These Iota pumps by Udor are perfect for horticultural and agricultural spraying applications, as well as for lawn and turf care spraying applications such as pest control. They can also be used for concrete seal coating and cleaning. | *$785.89 |
 | Udor Iota 20 Pump
Brand: justudorpumps.com Model: jup_Iota-20 Part Number: jup_Iota-20
The Udor Iota 20 Pump is a 2-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. This Iota 20 is a direct replacement pump for any Iota 17 pump. These Iota pumps by Udor are commonly used for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for seal coating concrete and cleaning. | *$391.57 |
| Udor Iota 20/GR Pump
Brand: justudorpumps.com Model: jup_Iota-20_GR Part Number: jup_Iota-20_GR
The Udor Iota 20/GR Pump is an Iota 20 pump with a gear reduction for 3HP to 5HP gas engines with 3/4" shafts. The Iota 20 is a 2-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. These Iota pumps by Udor are commonly used for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for seal coating concrete and cleaning. | *$514.80 |
| Udor Iota 20/GR-5/8 Pump
Brand: justudorpumps.com Model: jup_Iota-20_GR-5_8 Part Number: jup_Iota-20_GR-5_8
The Udor Iota 20/GR-5/8 Pump is an Iota 20 pump with a gear reduction for 2.2HP to 3HP gas engines with 5/8" shafts. The Iota 20 is a 2-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. These Iota pumps are mainly used for horticultural and agricultural spraying applications, as well as lawn and turf care spraying applications such as pest control. They can also be used for seal coating concrete and cleaning. | *$676.78 |
 | Udor Kappa 18 Pump Only (For Electric Motor)
Brand: justudorpumps.com Model: jup_K18DC Part Number: jup_K18DC
This Udor Kappa 18 Pump comes ready to couple to a 12 Volt electric motor (not included). This heavy-duty commercial pump features internally manifolded anodized aluminum construction and glass-filled nylon heads. This version of the Udor 18 pump is the replacement for the Kappa 18/12V pump and motor assembly. Use these Udor Kappa pumps for a range of agricultural, horticultural, and other lawn care spraying applications. Also perfect for pest control. | *$451.83 |
 | Udor Kappa-100 Pump
Brand: justudorpumps.com Model: jup_Kappa-100 Part Number: jup_Kappa-100
The Udor Kappa 100 pump is a medium pressure, 4-diaphragm pump with universal drive face, pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and a pressure gauge. The Udor Kappa 100 pump is for horticultural and agricultural spraying applications, along with lawn and turf care applications such as pest control | *$1,131.21 |
| Udor Kappa-100/C Pump
Brand: justudorpumps.com Model: jup_Kappa-100_C Part Number: jup_Kappa-100_C
The Udor Kappa 100/C Pump is a medium pressure, 4-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and a pressure gauge. This pump has a 1 3/8", 6-spline male PTO shaft. Use these Udor Kappa 100/C pumps for agricultural and horticultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$1,101.22 |
 | Udor Kappa-100/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-100_GR Part Number: jup_Kappa-100_GR
The Udor Kappa 100/GR pump is a Kappa 100 pump with a gear reduction for use on 16 HP and 18 HP gas engines with 1" shafts. The Udor Kappa 100 Pump is a medium pressure, 4-diaphragm pump with universal drive face, pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and a pressure gauge. The Udor Kappa 100/GR pump is perfect for horticultural and agricultural spraying applications, as well as for lawn and turf care applications such as pest control. | *$1,589.13 |
 | Udor Kappa 120/CC Pump
Brand: justudorpumps.com Model: jup_Kappa-120_CC Part Number: jup_Kappa-120_CC
The Udor Kappa 120/CC pump is a 4-diaphragm pump with pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. This Udor pump has a dual 1 3/8", 6-spline male PTO shaft. These Udor Kappa pumps are self-priming and can easily adapt to PTO's and gas engines. Use this Udor Kappa 120/CC pump for a variety of agricultural and horticultural spraying applications. It is also ideal for lawn and turf care spraying applications such as pest control. | *$2,357.92 |
 | Udor Kappa 120/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-120_GR Part Number: jup_Kappa-120_GR
This Udor Kappa 120/GR pump is a Kappa 120 pump with gear reduction for use on 18HP to 23HP gas engines with 1" shafts. The Udor Kappa 120 pump is a 4-diaphragm pump with pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, and pressure gauge. These Udor pumps are self-priming and can easily adapt to PTO's and gas engines. Use this Udor Kappa 120/GR pump for a selection of agricultural and horticultural spraying applications. It is also ideal for lawn and turf care spraying applications such as pest control. | *$2,295.11 |
| Udor Kappa 120/TS Pump
Brand: justudorpumps.com Model: jup_Kappa-120_TS Part Number: jup_Kappa-120_TS
This Udor Kappa 120/TS pump is a 4-diaphragm pump with pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, and pressure gauge. This pump has a universal drive face on the back and a 1 3/8", 6-spline male PTO shaft on the front. The 120/TS pump is self-priming and designed to easily adapt to PTO's and gas engines. You can use this Udor Kappa 120/TS pump for a range of agricultural and horticultural spraying applications. It is also ideal for lawn and turf care spraying applications such as pest control. | *$1,861.72 |
 | Udor Kappa 150/CC Pump
Brand: justudorpumps.com Model: jup_Kappa-150_CC Part Number: jup_Kappa-150_CC
The Udor Kappa 150/CC pump is a high pressure, high volume, 4-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, and pressure gauge. This 150/CC Udor pump has a dual 1 3/8", 6-spline male PTO shaft. These Udor Kappa series pumps are commonly used for horticultural and agricultural spraying applications, and also for lawn and turf care spraying applications such as pest control. | *$2,052.52 |
