 | Buyers 1 15/16in. Hydraulic Pillow Block, 2 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$16.99 |
 | Buyers 1 15/16in. Hydraulic Pillow Block, 4 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$19.99 |
 | Buyers 1 3/4in. Hydraulic Pillow Block
Brand: Buyers
Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. | *$13.99 |
| Buyers 1 3/4in. Hydraulic Pillow Block, 4 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$17.99 |
| Buyers 1 3/8in. Hydraulic Pillow Block
Brand: Buyers
Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. | *$10.99 |
| Buyers 1 3/8in. Hydraulic Pillow Block, 4 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$14.99 |
 | Buyers 1/2in. F NPTF x 1/2in. F NPTF Pipe Coupling
Brand: Buyers
National Pipe Tapered Thread fittings for fuels. Rated up to 10,000 PSI. U.S.A. | *$2.99 |
 | Buyers 1/2in. F/F NPSM x 1/2in. M NPTF Swivel Branch Tee
Brand: Buyers
For high pressure hydraulic systems. Swivel adapters are rated up to 10,000 PSI, depending on size. NPSM x NPTF Thread for metal to metal seal. U.S.A. | *$5.99 |
 | Buyers 1/2in. M JIC37 x 3/8in. M JIC37 Hose Adapter
Brand: Buyers
Adapts JIC 37 degree tube to SAE straight thread O-ring boss-style fittings. U.S.A. Fitting Size (in.): 1/2 M JIC37 x 3/8 M JIC37 | *$1.99 |
| Buyers 1in. Hydraulic Pillow Block, 2 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$8.99 |
| Buyers 1in. Hydraulic Pillow Block, 4 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$8.99 |
 | Buyers 1in. Hydraulic Pillow Block, Model# P16SCR
Brand: Buyers
Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. | *$5.99 |
| Buyers 2in. Hydraulic Pillow Block
Brand: Buyers
Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. | *$19.99 |
| Buyers 2in. Hydraulic Pillow Block, 4 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$29.99 |
| Buyers 3/4in. Hydraulic Pillow Block, 4 Bolt
Brand: Buyers
Match size with pillow block when ordering. | *$8.99 |
| Buyers 3/4in. Hydraulic Pillow Block, Model# P12SCR
Brand: Buyers
Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. | *$5.99 |
 | Buyers Bolt Kit for Hydraulic Pump Mounting Bracket
Brand: Buyers
Use these to mount pump, engine and bracket. Bolts and lock-washers are included. To select the correct kit, match your bracket, engine and pump type. | *$3.99 |
 | Buyers Breather Cap
Brand: Buyers | *$5.99 |
 | Buyers Dust Cap For Female Coupler - 1/2in., Model# FF08FC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$6.99 |
 | Buyers Dust Cap For Male Plug - 1/2in., Model# FF08MC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$6.99 |
| Buyers Dust Cap For Male Plug - 5/8in., Model# FF06MC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$3.99 |
 | Buyers Flow Control Valve-1/2in.
Brand: Buyers
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 3000 PSI, steel construction. | *$39.99 |
 | Buyers Fluid Level Gauge With Thermometer
Brand: Buyers
Fluid level gauge mounts on side wall of reservoirs up to in. wall thickness. Metal cover protects gauge from damage. Includes thermometer. Mounts with hollow in.-13 bolts on 5in. centers. 6.5in.H x 1.5in.W x 2.2in.D. | *$16.99 |
 | Buyers Flush-Face Coupler - 1/2in. Female; 1 1/16-12 UNF Port NPT, Model# FF08S12
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$59.99 |
| Buyers Flush-Face Coupler - 1/2in. Female; 1/2in. Port NPT, Model# FF0808
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$69.99 |
| Buyers Flush-Face Coupler - 1/2in. Female; 3/4in. Port NPT, Model# FF0812
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. Fitting Size (in.): 1/2 F x 3/4 NPT, Max. PSI: 5,000, Locking Sleeve: Yes | *$69.99 |
| Buyers Flush-Face Coupler - 3/8in. Female; 1/2in. Port NPT, Model# FF0608
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
| Buyers Flush-Face Coupler - 5/8in. Female; 3/4in. Port NPT, Model# FF1012
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$89.99 |
 | Buyers Flush-Face Plug - 1/2in. Male; 1/2in. Port NPT, Model# FM0808
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
| Buyers Flush-Face Plug - 3/8in. Male; 1/2in. Port NPT, Model# FM0608
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$16.99 |
 | Buyers Hydraulic Oil Suction Strainer
Brand: Buyers
Suction line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 149 micron stainless steel mesh element. This filter may be used where it is not possible to use an in-tank suction strainer. Not for use with pumps larger than 15 GPM. | *$44.99 |
 | Buyers Large Filter - 35 GPM Capacity
Brand: Buyers
Return line filter assembly with 1-1/4in. NPT ports with bypass. Includes 10 micron filter. Assembly is 5in. diameter x 7in. long. Use with our 22 GPM two-stage pump. Max. Flow (GPM): 35, Outlet Port (in.): 1 1/4 NPT, Filter Included: Yes | *$29.99 |
 | Buyers Return Line Filter - 20 GPM Capacity
Brand: Buyers
Extra Elements for Filter #4020. | *$11.99 |
 | Buyers Return Line Filter - 20 GPM Capacity
Brand: Buyers
Return line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 10 micron filter for optimum system cleanliness. This filter is typically located in the return line to the reservoir. Recommended for use with Suction Strainer 4010 or 4011. Fits systems with 2 to 25 GPM pumps. | *$16.99 |
 | Buyers Console for Item# 905321, Model# HVC1
Brand: Buyers
Console only for hydraulic spreader valve, Item# 905321. Easy installation. U.S.A. | *$54.99 |
 | Buyers 90 Degree Elbow - 1/4in. M JIC37 x 1/4in. M STOR
Brand: Buyers Products
Adapts JIC 37 degree tube to SAE straight thread O-ring boss-style fittings. U.S.A. Fitting Size (in.): 1/4 M JIC37 x 1/4 M STOR, Degree of Angle ( deg ): 90 | *$1.99 |
| Buyers Flow Control Valve-3/4in.
Brand: Buyers Products
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 3000 PSI, steel construction. Port Size (in.): 3/4, Max. Flow (GPM): 25, Max. PSI: 3,000 | *$69.99 |
 | Cash Acme 15836A-0150 Shark Bite Temperature and Pressure Relief Valves, 3/4-Inch 150 PSI
Brand: Cash Acme Model: 15836A-0150 Part Number: 15836A-0150
Sold as each. For protection of water heaters and storage tanks. Automatic reseating. 210 deg. temperature relief, starts to open at 200 deg. "White Coat":thermal element coating to isolate mineral buildup. AGA approved. ASME and CSA listed. 150 PSI *3/4" Connection. 3" Element Extension . Manufacturer number: 15836A-0150. Buy Hardware Supplies SKU #: 43363. Country of origin: United States. Distributed by Cash Acme Div. of Reliance Ww. | *$8.94 |
 | Cash Acme 2008-0000 Shark Bite SharkBite Check Valve, 1/2-by-1/2-Inch
Brand: Cash Acme Model: 2008-0000 Part Number: U2008A
General purpose spring check valve that prevents the reverse flow of water. Can be installed horizontally and vertically and can be connected in seconds to copper tubing, CTS, CPVC, and Pex. Instant push-fit connections for increase ease of use - no solde ring, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 150 degrees F (65 degrees C) (water). | *$9.36 |
 | Cash Acme 22222 Shark Bite Push-Fittings Ball Valve, 1/2-Inch
Brand: Cash Acme Model: 22222 Part Number: 22222
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off o f water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). | *$11.63 |
 | ALEMITE 1728-B STRAIGHT DRIVE FITTINGS - 3/16"
Brand: Chaps Model: 1728-B Part Number: 1728-B
"ALEMITE" DRIVE FITTINGS
33/64" length.
1/4" shank length.
3/16" drill diameter.
Used for untapped holes.
Avoids tapping costs.
Serrated shank provides secure, lasting grip.
Simplifies replacement of damaged fittings in old or oversized holes.
Used to avoid tapping costs for a wide variety of applications.
Recommended for low- and medium-pressure applications only.
Choose tool for straight-type drive fittings or tool for angle-type drive fittings. | *$1.49 |
 | ALEMITE 1743-B "CHAPS" DRIVE STRAIGHT GREASE FITTING - 1/4"
Brand: CHAPS Model: 1743-B Part Number: 1743-B
"CHAPS" DRIVE STRAIGHT GREASE FITTING
Used extensively to avoid tapping costs in a wide variety of applications. Alemite serrated shank grips securely and simplifies the replacement of damaged fittings in old or oversized holes. Recommended only for low and medium pressures.
Highlights:
Length: 35/64" [Max]
Male Barb/Hose: 1/4"
Shape: Straight
Type: Drive Fitting
Connection Type: Male/Male | *$1.49 |
 | Chicago Die Casting 95005 Pillow Block
Brand: Chicago Die Casting Part Number: 95005
Flanged sintered bronze bearing thrust side with built in oil reservoir. No. 95005: 1 2" shaft diameter No. 95006: 5 8" shaft diameter No. 95007: 3 4" shaft diameter | *$9.29 |
 | Chicago Die Casting 95007 Pillow Block
Brand: Chicago Die Casting Part Number: 95007
Flanged sintered bronze bearing thrust side with built in oil reservoir. No. 95005: 1 2" shaft diameter No. 95006: 5 8" shaft diameter No. 95007: 3 4" shaft diameter | *$7.44 |
 | Compact 12-Ton Hydraulic Shop Press - Ships UPS!
Brand: CMT Industrial Part Number: CMT-40214
*Heavy-duty all-steel shop press that doesn't take up the entire shop*Irreplaceable tool for applying controlled massive force up to 24,000 lbs evenly*Hundreds of practical applications; pressing, bending, axle, bushing bearing installation/removal*Strong dual springs retract ram quickly; adjustable-height platform, 2 press plates*Easy 30-minute assembly with common hand tools; overall dimension 53"H x 22"W x 22"L, 92 lbsPractical and affordable press powered by hydraulic ram with 12-ton maximum force. 5" stroke, quick-adjust platform height; maximum distance 32", minimum 7". 92 lbs total weight - ships UPS in one parcel. | *$159.79 |
 | CM COLUMBUS MCKINNON 664021 "HAMMERLOK" COUPLING LINK 7/32"
Brand: Columbus McKinnon Model: 664021 Part Number: 664021
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Chain Size: 7/32"
Working Load Limit: 2,100 Lbs. | *$26.99 |
| CM COLUMBUS MCKINNON 664028 "HAMMERLOK" 80-GRADE COUPLING LINK 9/32"
Brand: Columbus McKinnon Model: 664028 Part Number: 664028
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 9/32"
Working Load Limit: 3,500 Lbs. | *$33.99 |
 | CM COLUMBUS MCKINNON 664038 "HAMMERLOK" 80-GRADE COUPLING LINK 3/8"
Brand: Columbus McKinnon Model: 664038 Part Number: 664038
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 3/8"
Working Load Limit: 7,100 Lbs.
Material: Steel
Type: Folding Link | *$45.99 |
| CM COLUMBUS MCKINNON 664050 "HAMMERLOK" 80-GRADE COUPLING LINK 1/2"
Brand: Columbus McKinnon Model: 664050 Part Number: 664050
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 1/2"
Working Load Limit: 12,000 Lbs.
Material: Steel
Type: Folding Link | *$62.99 |
| CM COLUMBUS MCKINNON 664062 "HAMMERLOK" 80-GRADE COUPLING LINK 5/8"
Brand: Columbus McKinnon Model: 664062 Part Number: 664062
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 58/"
Working Load Limit: 18,100 Lbs.
Material: Steel
Type: Folding Link | *$72.99 |
