 | Reflectix BP24050 24-Inch-by-50-Foot Bubble Pack Insulation
Brand: Reflectix Model: BP24050 Part Number: BP24050
Inhibits or eliminates condensation. Nontoxic noncarcinogenic. Does not require protective clothing, goggles, or respirator. Ideal for basement walls, crawl spaces, or attic. Has R 16.8 value for crawl space applications and R 6.13 value for basement wall | *$39.34 |
 | Reflectix BP48050 48-Inch-by-50-Feet Square Edge Bubble-Pack Insulation
Brand: Reflectix Model: BP48050 Part Number: BP48050
Inhibits or eliminates condensation. Nontoxic noncarcinogenic. Does not require protective clothing, goggles, or respirator. Ideal for basement walls, crawl spaces, or attic. Has R 16.8 value for crawl space applications and R 6.13 value for basement walls. Resistant to mold, mildew, and fungi. Excellent for use with livestock and or produce. Class A Class 1 fire rated. 5 16'' thick. No. BP24050: 24'' x 50' No. BP48050: 48'' x 50' No. ST16025: 16'' x 25', tabbed 16'' on center No. ST24025: 24'' x 25', tabbed 24'' on center No. BP24010: 24'' x 10' No. BP48010: 48'' x 10' | *$78.72 |
 | Reflectix DW1202504 Spiral Duct Wrap
Brand: Reflectix Model: DW1202504 Part Number: DW1202504
12" x 25', Foil Spiral Duct Insulation Wrap. Eliminates Heat Loss Through Heating Ducts. | *$15.64 |
 | Reflectix SPW0402512 4-Inch by 25-Feet Spiral Pipe Wrap
Brand: Reflectix Model: SPW0402512 Part Number: SPW0402512
4" x 25' Spiral Pipe Wrap, Prevents Freezing Pipes, Eliminates Condensation Damaging Drips. | *$6.94 |
 | Reflectix ST16025 Staple Tab Insulation
Brand: Reflectix Model: ST16025 Part Number: ST16025
This roll of reflective tape makes taping foil insulation a breeze. 16" x 25' roll repels heat and air bubble lining resists heat transfer. Energy-saving and non-toxic. Roll Of Double Bubble Foil Both Sides Staple Tab Reflective Insulation, Designed To Be Installed Between Studs That Are 16" On Center, R-Value Will Vary Depending On Application | *$13.90 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 10 Port, 1.50 W x 15.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-530
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$34.05 |
 | Remin Tri-Kart 800, Folding, 300 lbs Capacity, 4 Wheels
Brand: Remin
Remin Tri-Cart 800 Capacity: 300 lbs. Open Size: Height: 48"; Base: 15.75" x 12.5" Closed Size: 20.25"H x 16"W x 7"D Platform Size: 12-1/2" x 16" Adjustable Handle: Yes Number of Wheels: 2 Wheel Size: 6" Weight: 13 lbs. Warranty: 10-Year | *$221.00 |
 | Remington MP-22TM Pink Earmuffs
Brand: Remington Part Number: MP-22
Stylish women's hearing protection with an adjustable headband, gunstock cut-out in a fashionable pink color. | *$11.99 |
 | Remington T-10TM Safety Glasses - Youth Size
Brand: Remington Part Number: T10-10 | *$3.70 |
 | Remington T-10TM Shooting Safety Glasses - Youth Size
Brand: Remington Part Number: T10-60 | *$4.91 |
 | Remington T40-10 Shooting Safety Glasses - Clear Lens
Brand: Remington Part Number: T40-10-X | *$3.08 |
 | Remington T-40TM Shooting Safety Glasses - Orange Lens
Brand: Remington Part Number: T40-N-X | *$3.49 |
 | Remington T-63TM Safety Glasses - 3 Lens Interchangeable - Clear, Smoke, and Amber Lens
Brand: Remington Part Number: T63-X
These are the shooting glasses that have it all literally. Remington T-63 glasses include three types of lenses and our stylish metallic grey finish frame. Easily interchangeable Clear AP¹, Amber HC², and Smoke N³ lenses are all included. Of course, it comes with a premium black carrying case with extra pockets for multiple lenses and an adjustable retainer cord as well. With three lenses to choose from, you can be assured that youll have perfect protection in any type of lighting conditions. The T-63 Shooting Glasses the glasses that have it all. | *$15.85 |
 | Remington T-75TM Safety Glasses - Green Mirror
Brand: Remington Part Number: T75-GR-X
Remington T-75 Safety Glasses Adjustable temple length and lens angle adjustments. Soft, rubber nosepiece. 99% protection from harmful UV rays. ANSI Z87.1 + certified. Sold per pair. | *$4.81 |
 | Remington T-76TM Safety Glasses - Clear Lens
Brand: Remington Part Number: T76-10 | *$1.88 |
| Remington T-76TM Safety Glasses - One Dozen - Clear Lens
Brand: Remington Part Number: T76-10-C | *$20.93 |
 | Decorative Molding Oak 6'
Brand: Restorers Affiliate Part Number: 2-0516 6'OAK
Nothing gives furniture or cabinetry that truly custom look more quickly than the addition of one of our select decorative oak moldings. Try some and you'll be amazed how easy it really is to "upgrade" your next project! | *$7.49 |
 | Basement Pole Cover Paint Grade 8'
Brand: Restorers Affiliate Part Number: PAINT GRADE
Do you want to finish a basement area but need to cover those ugly steel support posts? This basement pole cover fits the bill beautifully and is easy to do! The pole cover comes in 2 pieces with biscuit joints cut in the edges. Select the correct spacer to fit between the pole and cover, then apply glue to the edges, put the 2 halves together and clamp with the cable ties included. The pole cover comes 8' long with top and bottom trim collar. Will work on poles 3" to 4" in diameter. Paint to match your room decor. | *$169.99 |
 | Retraact-It 9500 EZTV Flat Panel Monitor Tiltable Wall Mount for 12-to-23-Inch Monitors, Silver
Brand: Retraact-It Model: 9500 Part Number: 9500
If you're tired of complicated products, that are too confusing to assemble and install, then this LCD TV and Flat Panel Monitor wall mount is a great solution for you! This LCD monitor mount is so easy to install, you will be enjoying your newly wall mounted LCD monitor or television in very little time at all! Just find and mark the center of a wood stud in your wall, screw in the flat panel TV wall mount, and attach it to your LCD television set or monitor. This flat panel TV wall mount even gives you the option of a fixed or tilted position. It comes with a top leveling system that allows you to make adjustments, and a bottom locking system for security. This LCD monitor wall mount is made of heavy-duty steel, with a durable silver powder coated finish. Available in two sizes: Item #118364 fits 12" to 23" monitors and television sets, and has a 90-lb. weight capacity. Item #118365 first 23" to 32" monitors and television sets, and has a 90-lb. weight capacity. Assembly level/degree of difficulty: Easy. | *$11.49 |
 | Retraact-It 9800 Universal 3-In-1 LCD Television Mount
Brand: Retraact-It Model: 9800 Part Number: 9800
Display your small LCD television set or computer monitor like a work of art on the wall with this heavy duty flat panel TV wall mount! This LCD TV mount fits monitors and TV sets measuring 12"-31" wide. The TV wall mount bracket features multiple articulating positions from fixed, 5 or 10 degree tilt positions, and 150-degree swivel and tilt. The versatility of positions makes the wall mount bracket ideal for mounting a flat panel TV set in an area like the kitchen, where you may want to angle it depending on where you're standing. This swivel TV mount is Vesa compliant 50mm, 75mm and 100mm. The maxium weight it can hold is 70 pounds. The wall mounting bracket is constructed of high quality steel with a durable powder coat finish. Comes fully assemble and is easy to install! Assembly level/degree of difficulty: No Assembly Required. | *$20.99 |
 | Sjoberg 995-2000 Nordic Plus Cupboard
Brand: Robert Larson Model: 995-2000 Part Number: 33374
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Based upon the latest SJOBERGS design, the Nordic Plus series gives you the size you need at a price you can afford. The Nordic storage cabinet features include two sliding doors with access to a large 24-1/4" x 15" x 15" open cabinet and four drawers measuring 3-1/2" x 12-1/4" x 12-1/4" each. Entire case measures 38-3/4" x 18" x 17-5/16". Includes a new set of stretchers. Assembly required. | *$159.99 |
 | Sjoberg 995-5100 Holdfasts for Nordic Plus/Duo Workbenches, 2-Pack
Brand: Robert Larson Model: 995-5100 Part Number: 995-5100 | *$36.99 |
 | Sjoberg 995-6300 Anvil
Brand: Robert Larson Model: 995-6300 Part Number: 33620
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. The Elite series of workbenches is smarter and heavier than any alternatives on the market anywhere! A Steel Anvil (two L-shaped vise liners) is also available to protect your vise when clamping small metal parts. | *$92.50 |
 | Sjoberg 33181Rubber Jaw Protectors for Elite Workbenches, 2-Pack
Brand: Robert Larson Model: 995-6400 Part Number: 33181 | *$86.99 |
 | Roberts Harmony 3 in 1 Underlayment
Brand: Roberts
A 100 square foot roll of premium 3-in-1 underlayment for use under all laminate and engineered floating floors. Harmony provides the moisture barrier, sound reduction and cushioning required for proper installation in a single 3-in-1 product. Unique construction creates a pocket of constantly circulating air which inhibits mold growth. Ideal for condos, basements, and multii-level dwellings. Comes with an 8 inch overlap with an adhesive strip for easy installation.
Both tests measure sound transference from an upper level room to a lower level room. The IIC measures sound such as moving furniture and walking, while the STC measures sound
such as voices and television. Minimum sound rating required by most building codes and architects is 50.
*Compression Test Results
In a standardized test using 1,320 lbs. of pressure, Roberts Harmony Underlayment retained 96% of its original thickness after seven days, compared to only 57% by a leading 2-in-1 foam product. | *$26.99 |
 | Roberts #10091 Handheld Tile File
Brand: Roberts Part Number: 10091
Handheld Tile File, Grit Edge Carbide File, Sands Smooths Rough Edges On Ceramic Tile. | *$15.10 |
 | Q.E.P./Roberts 1408-2 Urethane Wood Floor Adhesive
Brand: Roberts Part Number: 1408-2
2 gallon 100% solids, moisture cure urethane adhesive, high green strength formula. For use on prefinished solid plank, flat milled shorts, bamboo, parquet, 3 and 5 ply engineered plank, and plywood. It can also be used to install ceramic tile, marble, an | *$58.67 |
 | 1/4'' Neatform Bendy MDF Sheet
Brand: Rockler
It's easy to make custom curves with this high-quality bendable sheet material, eliminating the hassle of steam bending or kerfing. Ideal for columns, counter fronts, wavy walls, ceilings and cabinet making. | *$19.99 |
 | Walnut - 48'' x 10'' Dimensional Veneers- No Backing
Brand: Rockler
Save time and money! 48" long veneer. When you buy this veneer, there is no waste because it has straight, parallel edges and no defects. Unfinished real wood with no paper backing. Accepts stains and finishes. Grains run lengthwise. Approximate sizes usually run about 1/2" over. All dimensional veneers are plain sliced unless otherwise noted. brbr brNOTE: Because of special handling requirements, there is a two sheet minimum order for this product. | *$5.69 |
 | Starter Wood Veneer Kit
Brand: Rockler
Small pieces of veneer for small repairs. This Starter Veneer Kit contains 25 square feet of assorted raw veneers: Birch, Oak, Cherry, Walnut, and Mahogany. Random sizes 3" to 8" wide and 24" to 36" long. A perfect assortment for veneer repairs on smaller pieces of furniture. Thicknesses may vary from 1/32" to 1/28". Accepts stains and finishes. | *$24.99 |
 | Baltic Birch Plywood - 1/4'' thick, 24'' x 30''
Brand: Rockler
The front, back and inner plies are quality one-piece plies. Highly decorative, exceptional strength and great screw holding power. May include matched face plugs. Plywood is Grade BB, (Both faces may contain patches, slight knot pattern and mineral streaks. The inner plies will contain some patches, but are relatively "void free"). | *$9.99 |
| Baltic Birch Plywood - 3/8'' thick, 24'' x 30''
Brand: Rockler
The front, back and inner plies are quality one-piece plies. Highly decorative, exceptional strength and great screw holding power. May include matched face plugs. Plywood is Grade BB, (Both faces may contain patches, slight knot pattern and mineral streaks. The inner plies will contain some patches, but are relatively "void free"). | *$11.99 |
 | 3/4'' X 100 ft Plastic T-Molding Brown
Brand: Rockler
3/4" plastic T-molding for plywood and other 3/4" materials. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove. Two ribs on the insert edge of the molding hold it securely in place. brRequires a 1/16" kerf for installation. | *$37.49 |
 | 24'' x 24'' Pressure Sensitive Veneer - White Birch
Brand: Rockler
Apply without mess or expensive tools! Unfinished real wood. Accepts stains and finishes. Straight grained. Grain runs the length of the roll. brbr brThis premium grade 1/64" thick flexible veneer comes with a 10 mil thick paper for stability and a pressure sensitive adhesive applied to its backside. Simply cut the veneer to size with a scissors, peel off the backing, and apply to the substrate. You can strengthen the bond between the veneer and substrate by applying pressure with a veneer smoothing blade. Pressure sensitive veneer permanently bonds to wood, glass, plastic and metal. Not recommended for use on fir plywood. It also accepts stains and finishes. | *$24.49 |
 | Rockler Basswood Carving Blank Assortment, 20 lbs.
Brand: Rockler Part Number: 20LBBOBCB
A carver's delight! This lightweight, soft hardwood cuts easily and cleanly with and against the grain. It is preferred by master carvers and perfect for beginners! brTake advantage of this great value on quality carving stock, hand-picked by our lumber experts. It's valued at more than $40 if blanks are purchased separately. | *$28.50 |
 | Three-Hole Veneer Tape, 650'
Brand: Rockler Part Number: T1334/20/200/3
Splice your veneer together with this white 34 gram cellulose tape. 3/4" wide by 650 feet long. Maximum visibility tape has three-hole pattern for clear viewing of joint. | *$13.99 |
 | Rockler Bench Cookies, 4-Pack
Brand: Rockler Model: 26357 Part Number: TABC334-4
With high-friction rubber surfaces and a durable core, Bench Cookies are the most exciting, versatile accessory to hit wood shops in years. They keep projects from slipping while routing, sanding, carving and more. They raise up panels for edge work and finishing. They make assembly easier. And they set up in seconds. br brBench Cookies give you the freedom and ability to: br* Rout, sand, cut and carve without using clamps br* Raise up workpieces for easy edge finishing br* Support projects without leaving marks br* Assemble projects on a stable, non-slip base br* Set up quickly for any application br brThe secret is the Bench Cookie's grippy, non-marring rubber pads. Similar to material on router mats, these pads grab your bench and your workpiece at the same time for rock-solid holds. For best results, use at least four Bench Cookies to stabilize your projects. | *$11.99 |
 | Exotic Cutoffs, 10 lb. Box
Brand: Rockler Model: EXOTIC CUTOFFS 10 LB BOX Part Number: EXOTIC CUTOFFS 10 LB BOX
A blend of assorted exotics - perfect for ornamental turnings and small projects. May include some rare species worth up to $25 per board foot. No two boxes are exactly the same! Sizes range from roughly 2" to 12" long. Widths and thicknesses vary widely. Box measures 8" x 6" x 12". | *$19.99 |
 | 6-pack of 1'' Roller Balls
Brand: Rockler Model: TAB-25C Part Number: TAB-25C
Build your own extension tables with our popular ball-bearing rollers! Now available in economical quantity packs! Multi-directional. | *$24.99 |
 | Rockler Roller Support with Universal Clamp
Brand: Rockler Model: TAS-4401 Part Number: TAS-4401
Our exclusive roller support gives you all the support you need in the shop or on the job site! You'll get perfectly level alignment and support for any outfeed application on any tool in your shop. Innovative clamp easily attaches to any sawhorse built with either horizontal or vertical 2x's (2x4, 2x6, etc.) or on workbenches up to 2-1/2" thick. Plus, rotating roller head accommodates any setup!
br
brUnique 3" low profile allows the roller support to be clamped on a workbench or saw horse for use with chop saws and planers. Roller can be adjusted side to side for a full 11" support over the bench from the edge. Features 1-1/2" x 17" steel ball bearing roller with spring-loaded axle and side-to-side adjustability for workbench applications. Height adjustment from 3" to 15-5/16". With 90-lb. weight capacity. Patented. Position your roller exactly where you need it! Easily hangs on the wall for storage, giving you quick access to this do-everything stand! | *$45.99 |
 | Rockwell RK9000 Jawhorse
Brand: Rockwell Model: RK9000 Part Number: RK9000
Jawhorse, Saw Horse With Clamp, Powerful Foot Operated Clamping Force Applies As Much Or As Little Clamping Pressure As Required, Tripod Base For All Terrain Stability, Lock Release Switch Allows Fast Release Of Jaw, Quickly Folds Down For Storage, Rear Leg Acts As Carry Handle, Front Has Transport Wheels For Easy Transport, 37-inch maximum clamping range, 600 lb. maximum load, 39-by-39-by-34-inch standing size, 29-by-14-by-13-inch folded size. | *$176.00 |
 | Rollex 14X50 .019 Aluminum Coil Stock
Brand: Rollex Part Number: Rollex14X50
14"x50'wht/brz alum coil. Each coil individually cartoned. Refer to pricing below for available sizes and colors. | *$57.54 |
 | Roppe Corporation HC40C51S100 Self-Stick Vinyl Wall Base
Brand: Roppe Part Number: HC40C51S100
20' L. x 4" W. continuous roll. Made of high quality vinyl, .080" thick. High strength adhesive adheres to most clean surfaces. Easy to use, simply peel and press into place. Curved toe design for use with either carpet or tile. Satin finish. No. HC40C51S | *$16.73 |
 | Roppe Corporation HC40C53S150 Self-Stick Vinyl Wall Base
Brand: Roppe Part Number: HC40C53S150
20' L. x 4" W. continuous roll. Made of high quality vinyl, .080" thick. High strength adhesive adheres to most clean surfaces. Easy to use, simply peel and press into place. Curved toe design for use with either carpet or tile. Satin finish. No. HC40C51S | *$16.73 |
 | Satin Nickel Finish Flush Bolt with Rounded Bottom
Brand: RPM Part Number: RPM Hardware
Comes with matching color strike plate and screws. Flush bolts are designed to hold the passive door closed on a double french door. Our flush bolts are manufactured by RPM Hardware and match our locks in this finish. | *$4.99 |
 | Light Weight Multi-Purpose 12' Aluminum Ladder - 300 LB Capacity
Brand: Rrt
This ladder can have at least 7 different uses and functions. With 3 multi position articulating hinges that allow 18 different configurations, this ladder can be a step ladder, double step ladder, extension ladder, mezzanine ladder, multi-lever ladder, platform scaffold or a stair-step scaffold. Made with high quality aluminum, lightweight and rustfree. With all these features, you won't need to buy another ladder. | *$79.99 |
 | 110-Piece Hydraulic Grease Fitting Assortment - SAE
Brand: RRT | *$8.78 |
 | ATV Electric Cable Winch with Handheld Remote Control - 1500 LB Capacity
Brand: RRT Part Number: 11302
12 V 1, 500 lb Electric Winch * Designed for ATV * Max: 1500 lb * Gearing: Differential Planetary * Motor: .71HP * Gear Ratio: 153:1 * Control Remote Switch: 3m Lead * Line Speed: 3.2m (10-1/2')/min No Load 2m(6-9/16')/m at 1500lb Load * Not for Overhead Lifting | *$54.99 |
 | 4000 Lb Lift Capacity Easy-Carry Hydraulic Jack
Brand: RRT Part Number: 20261
Almost every car and truck sold today includes a vehicle jack but unfortunately, most seem to require an advanced engineering degree to locate and operate properly--and especially when attempting to re-stow the jack. Our popular Jack-in-a-Box is a much simpler-to-use and less-frustrating alternative, plus it comes in a custom-fit storage and carry case so it's always easy to find and grab. * 2 Ton Mini Floor Jack * Blow Mold Case * 5-1/3 * Over Pumping Prevention by-pass System | *$17.99 |
 | Vehicle Moving Jack - HYDRAULIC Car Dolly
Brand: RT (Royal Tint) Model: 20634 Part Number: 20634
Professional positioning hydraulic jack help to move your car or engine easily. Features with heavy duty all steel constructions and a quick-release foot pump. Maximum capacity rated at 1500 lbs, rolls easily in any direction. Package includes one dolly as shown - purchase 4 to lift the entire car | *$93.99 |
