 | Mexican Tile - 4x4 Yellow Marguerite Talavera
Brand: Tierra y Fuego Part Number: 10074-4
The Yellow Marguerite talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Amapola Verde Talavera
Brand: Tierra y Fuego Part Number: 10077-4
The Amapola Verde talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Jardin Talavera
Brand: Tierra y Fuego Part Number: 10100-4
The Jardin talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Zacatecas Talavera
Brand: Tierra y Fuego Part Number: 10102-4
The Zacatecas talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Hacienda Talavera
Brand: Tierra y Fuego Part Number: 10106-4
The Hacienda talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Terra Cotta Blue Lace Talavera
Brand: Tierra y Fuego Part Number: 10108-4
The Terra Cotta Blue Lace talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Honey Suckle Talavera
Brand: Tierra y Fuego Part Number: 10116-4
The Honey Suckle talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Flecha Talavera
Brand: Tierra y Fuego Part Number: 10117-4
The Flecha talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Blue Chapala Talavera
Brand: Tierra y Fuego Part Number: 10122-4
The Blue Chapala talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Chapala Talavera
Brand: Tierra y Fuego Part Number: 10125-4
The Chapala talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Palacio Sencillo Talavera
Brand: Tierra y Fuego Part Number: 10127-4
The Palacio Sencillo talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Tapatio Talavera
Brand: Tierra y Fuego Part Number: 10137-4
The Tapatio talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Moño Talavera
Brand: Tierra y Fuego Part Number: 10143-4
The Moño talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Potosi Talavera
Brand: Tierra y Fuego Part Number: 10149-4
The Potosi talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Monaco Talavera
Brand: Tierra y Fuego Part Number: 10168-4
The Monaco talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Dolores Talavera
Brand: Tierra y Fuego Part Number: 10175-4
The Dolores talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Hacienda Amarilla Talavera
Brand: Tierra y Fuego Part Number: 10181-4
The Hacienda Amarilla talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Tamazula Talavera
Brand: Tierra y Fuego Part Number: 10208-4
The Tamazula talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Green Seville 2 Talavera
Brand: Tierra y Fuego Part Number: 10209-4
The Green Seville 2 talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Espiga Verde Talavera
Brand: Tierra y Fuego Part Number: 10229-4
The Espiga Verde talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Quarter Sun Talavera
Brand: Tierra y Fuego Part Number: 10238-4
The Quarter Sun talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Vine 2 Talavera
Brand: Tierra y Fuego Part Number: 10241-4
The Vine 2 talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Tiger Brand #JS-100 4'8-8'4 15GA Jack Post
Brand: Tiger Brand Model: J-S-100 Part Number: JS-100
4' 8" To 8' 4", 15 Gauge Adjustable Jack Post, Max Ext Load 9,100 LBS, Min Ext Load 18,000 LBS, Additional Support For Crawl Spaces, Attic, Staircase Or Decks, Adjusts With 3/4" Wrench, O.D. Gauge Tube Dim 2-1/4" x 15 Gauge x 49", Screw Size 1" x 7", -5 Thread Support, Collar Size 2-1/4" x 1/2", Support Pins 1/2" x 3", 13 Gauge Plate Size 4" x 5", Corrosion Resistant Inside Out, Double Carriage Bolt Nut (Zinc Coated) For Added Safety, Heavy Plates Suited For Wood Steel, Deep Dish Self-Centering | *$35.42 |
 | Tiger Brand #JS-93 4'5-7'9 15GA Jack Post
Brand: Tiger Brand Model: J-S-93 Part Number: 79G
Adjustable Floor Post, Adjusts 4' 6" To 7' 9", Safe Load Capacity: 11,350 To 14,200 LBS. | *$30.23 |
 | Tile Guard One Step Grout Coating Pen- Tan
Brand: Tile Guard
Tile Guard One Step Grout Coating Pen- Tan
This grout restoration technique is easy to use and provides immediate satisfaction. You'll find yourself using it frequently with these excellent results.
Tile Guard One Step Grout Coating Pen renews existing grout with an attractive and durable coating. Use the pen to cover stains and restore the original look of tiled surfaces. Simple to use, just draw a line over existing grout with the pen style applicator. Instantly, grout lines are transformed with a clean and bright water-resistant finish. Its also the ideal product to change the color of grout lines without re-grouting.
Providing a long lasting coating over dingy grout, our Grout Coating Pen is the fast, easy, economical and fun way to provide a face-lift to tired-looking grout.
Covers up stubborn grout stains instantly!
Non-Flammable
Water-based
Perfect for changing grout color to tan
Easy to use applicator with reversible nib
Long lasting coating
Covers 175 Lineal feet of average grout lines
Available in Tan and Grey- This is for the TAN color | *$6.99 |
 | Custom Building Prod. TLGTC1-2 Tilelab Grout And Tile Cleaner
Brand: TileLab Custom Building Products Part Number: TLGTC1-2
A nonabrasive citrus based cleaner with a strong grease cutting formula. Cuts through dirt, food, soap scum, water spots, mold, and mildew. Will not harm tile, grout, chrome, glass, and formica. Safe for everyday kitchen use. Ready to use, wipes off witho | *$10.32 |
 | Franklin 5115 Titebond Solvent Free Multi-Purpose Flooring Adhesive - Quart Can
Brand: Titebond Model: 5115 Part Number: 5115
Titebond Solvent Free Multi-Purpose Flooring Adhesive is designed for the installation of conventional carpet, vinyl composition tile, sheet vinyl and resilient flooring. It offers a moderately slow tack and longer open time to allow for more precise flooring installations. Titebond Solvent Free provides a professional-strength bond that is highly water-resistant. It contains no ozone-depleting chemicals, is nonflammable, emits no harmful fumes and cleans up with water. | *$5.74 |
 | Hoist - Ultra-Duty 1,500 lb Cable Hoist 1-1/2 HP
Brand: TJL Part Number: 10179 | *$239.95 |
 | 3 Ton Jack Stands (2 per box) - Heavy Duty Self Locking
Brand: TMS Wholesale, INC Part Number: AJ-CHIJS300 ; RR-20855
html head meta http-equiv="Content-Language" content="en-us" meta http-equiv="Content-Type" content="text/html; charset=windows-1252" titleNew Page 1/title /head body pfont face="Arial" size="5"Brand New Set of 2 Jack Stands - 3 Ton/font/p ul lifont face="Arial" style="font-size: 13pt"1 Pair /font/li lifont face="Arial" style="font-size: 13pt"3 Ton capacity/font/li lifont face="Arial" style="font-size: 13pt"Carbon steel base with durable cat iron pawl /font/li lifont face="Arial" style="font-size: 13pt"Adjustable height : 11-1/2" to 17"/font/li lifont face="Arial" style="font-size: 13pt"Ductile Ron Rack/font/li lifont face="Arial" style="font-size: 13pt"Ratchet type for fine adjustment/font/li lifont face="Arial" style="font-size: 13pt"Self-locking ratchet/font/li lifont face="Arial" style="font-size: 13pt"Solid steel handle/font/li lifont face="Arial" style="font-size: 13pt"Large base area to prevent sinking under load/font/li /ul p /p p /p p /p /body /html | *$17.80 |
 | Heavy Duty 5/8" Trailer Hitch PIN WITH LOCK - Secure
Brand: TMS Wholesale, INC. Part Number: AJ-Taiah030 - $$0108
html head meta http-equiv="Content-Language" content="en-us" meta http-equiv="Content-Type" content="text/html; charset=windows-1252" titleNew Page 1/title /head body pfont face="Arial" size="5" color="#FF0000"5/8" Hitch W/ Lock! Secure Ball Mounts and Couplers or Receivers/font/p pfont face="Arial" color="#0000FF"Features:/font/p ul lifont face="Arial" style="font-size: 13pt" color="#FF0000"Comes w/ 2 Keys for Lock/font/li lifont face="Arial" style="font-size: 13pt" color="#FF0000"Chrome Plated Shaft Resists Rust and Corrosion Prolong Pin Life/font/li lifont face="Arial" style="font-size: 13pt" color="#FF0000"New/font/li /ul /body /html | *$6.99 |
 | Todol Long-Barrel Pageris
Brand: Todol Part Number: GU24
These are professional grade stainless steel guns used to apply low expansion foam. With appropriate care they will last for years. The nozzle length is of the GU01 is 7.25 inches, and the nozzle length of the much larger GU24 is 26.5 inches.
Warranty: 1 Year Limited | *$150.95 |
 | Todol Pur Shooter
Brand: Todol Part Number: SH01
This metal gun is an all metal foam applicator gun appropriate for many small do-it-yourself foaming projects. The nozzle length is 6.25 inches. | *$37.95 |
 | Grid Punch
Brand: Toolpro Part Number: 05060
Use when installing suspended ceiling grid. Use to connect grid cut at non-standard lengths. Punch holes 1/8" rivets, punches 9/16" grid. | *$24.47 |
 | Shadowline Cutter
Brand: Toolpro Part Number: 5110
Cut shadow line, perimeter tile. | *$11.53 |
 | Dual Hitch Extension Cap:4000Lbs
Brand: ToolShopUSA
Unique dual tow hitch extension designed to allow you to use your tow accessories (like a motorcycle or cargo rack) and still have your regular tow hitch receiver for towing. Perfect for your car, truck, or RV. Rated at 4000 LBS. Dual hitch capacity extension comes with two 2" receivers, lower tube with collar for towing and upper tube for accessories. Black powder coated steel. | *$36.00 |
 | Topline BR1210 Round/Square Ladder Mounted Bike Rack
Brand: Top Line Model: BR1210 Part Number: BR1210
TopLine Ladder Mounted Bike Rack for Round/Square Step Ladders Fits any ladder, any make, any model, any year, any vehicle. Unique "Docking System" hooks on without use of tools. Holds two bikes securely. Easy on... easy off... Engineered "Tie-Down" system. All straps and cushions included. Bikes protected from damage. Anodized to resist corrosion. Weighs only 2.1 pounds. No assembly required. Stores easily. L: 29" W: 11" H: 10" Additional Information Product Instructions | *$81.95 |
 | Torin Big Red Hydraulic Ram Hose - 10-Ton Capacity, Model# T71102
Brand: Torin
High-pressure hose with 1/4in. connections. For use with 10-ton hydraulic ram system, Item# 144424 (sold separately). Hose Fitting Size (in. NPT): 1/4 | *$19.99 |
 | Torin Big Red Hydraulic Bottle Jack - 4-Ton, Model# T90403
Brand: Torin Part Number: 447672
With high quality, glide action pressure pump. Powerful jack makes big loads easy to lift. Minimum height is 7 1/2in., lifting height is 4 3/4in. Handle included. | *$13.94 |
 | Torin T90803 8 Ton Hydraulic Bottle Jack
Brand: Torin Model: T90803 Part Number: T90803
Torin 8 Ton Hydraulic Bottle Jack features a superior quality steel frame with a safe ratcheting head and a high quality glide action pressure pump which makes it a must for every auto shop and home. This powerful jack makes big loads easy to lift and lifts to a maximum height of 5.75 inch. | *$24.99 |
 | Torin T92003 20 Ton Hydraulic Bottle Jack
Brand: Torin Model: T92003 Part Number: T92003
Torin 20 Ton Hydraulic Bottle Jack features a superior quality steel frame with a safe ratcheting head and a high quality glide action pressure pump which makes it a must for every auto shop and home. This powerful jack makes big loads easy to lift. | *$34.99 |
 | Torin T93007 30 Ton Hydraulic Bottle Jack
Brand: Torin Model: T93007 Part Number: T93007
Torin 30 Ton Hydraulic Bottle Jack features a superior quality steel frame with a safe ratcheting head and a high quality glide action pressure pump which makes it a must for every auto shop and home. This powerful jack makes big loads easy to lift. | *$79.99 |
 | Torin TR9650 Snow Mobile Dolly Set
Brand: Torin Model: TR9650 Part Number: TR9650
Torin Snow Mobile Dolly Set comes with two 8 x 8 inch steel triangular dollies that are grooved to fit under the skis, while a third 8 x 7.12 inch rectangular dolly slips under the rear track. The dolly set has a 2 inch hard rubber swivel casters that roll as smooth as glass. | *$39.99 |
 | Tornado Tools 440 lbs. Electric Hoist
Brand: Tornado Part Number: PA200B
Lift up to 440 lbs. at the press of a button with this handy professional electric garage hoist! New low price! Need to lift an engine out of a vehicle, move heavy objects without breaking your back, hoist objects into your pickup or hang game? Get the job done in a flash with this hoist! Big heavy loads are no problem thanks to this powerful 110V hoist. The 460W, 2/3 HP motor runs off regular household current and lifts up to 440 pounds in seconds. Also features 38' steel wire cable with sheaved pulley lift hook, weighted lift hook, water sealed remote switch and easy-to-install design. Requires no expensive wiring. Mounting clamps and cable guide included. | *$179.99 |
 | TPI Workstation Fan - 18" Blade Diameter
Brand: TPI Part Number: YD-5236
Meets OSHA sandards | *$126.00 |
 | Heavy-Duty 10-Ton Air Hydraulic Pump - Foot Control
Brand: TR
Operates at 70-170 PSI to develop up to 10,000 PSI, maximum output 20,000 lbs. Average air consumption 10 CFM; air inlet 1/4" NPT, includes 6' hydraulic hose with fitting; Stroke length 1", oil flow at 100 PSI 30 cu in/min; usable oil capacity 42 cu in (690cc). | *$116.00 |
 | TracksPlus Steel Skid-Steer Track for Bobcat 700 series, S130, S150, S175, S185 and S205, Model# T-1000B/34
Brand: TracksPlus
Strong steel tracks give your skid loader the traction to go where you've never gone before. It's almost like having a new machine! Constructed of tough Marbain material for long-lasting strength - up to 1800 hours of use - and improved loader stability. Easy-on in 20 minutes, easy-off in 10. U.S.A. | *$1,199.99 |
 | Travel Smart TS31LHT Ladderkart Professional Grade Stepladder
Brand: Travel Smart Model: TSM-31LHT Part Number: TSM31LHT
Franzus Travel Smart Ladderkart Professional Grade Stepladder and Hand Truck is lightweight and flat folding for easy storage and transport. It has a lightweight strong aluminum frame that folds to 6.5" flat. It has a 300 lb. weight capacity for the stepladder and a 250 lb. weight capacity for the hand truck. | *$70.90 |
 | Tricam AUL-2 UltraLight Aluminum 2-Step Stool
Brand: Tricam Model: AUL-2 | *$37.45 |
 | Tricam AUL-3 Lite Step Aluminum 3-Step Stool
Brand: Tricam Model: AUL-3 | *$42.69 |
 | Tricam GOR200G 600-Pound Capacity Gorilla Carts Dumping Cart
Brand: Tricam Model: GOR200 Part Number: GOR200
"GORILLA CARTS" PLASTIC GARDEN DUMP CART
600 pound load capacity
Ideal for yard and landscaping projects
Balanced dumping for quick unloading
Durable molded bed will not rust
Bed size: 7-1/2"H x 19-3/4"W x 36-1/4"L
10" pneumatic tires.
Straight pull handle. | *$89.99 |
|
